618147

Numark N4 Manual

6
Zoom out
Zoom in
Previous page
1/36
Next page
6
REAR PANEL
1. POWER SWITCH – Turns the unit’s power on/off.
2. POWER INPUT – Connect the included power cable here to power the unit.
3. USB – This USB connection sends and receives control information to/from a connected computer.
4. USB IN REC/TIMECODE – Selects whether you are using the USB connection to input audio to the computer
or send a timecode signal through to control the software (unsupported in VirtualDJ LE).
5. XLR OUTPUT – Balanced stereo output.
6. GROUNDING LUG – Used to ground a turntable to the chasis.
7. MASTER OUTPUT – Outputs the signal to speakers sent by the computer, the RCA inputs or the microphone
inputs.
8. BOOTH OUTPUT – Secondary output used to go to a pair of speakers.
9. LINE/PHONO – Selects whether the corresponding input is set to line level or phono level.
10. INPUT 3 – RCA input for line level or phono level devices.
11. INPUT 4 – RCA input for line level or phono level devices.
TOP PANEL
1. PITCH FADER – Controls the track's
playback speed. An LED next to the
fader will light up when set at 0%.
2. FX PARAM/ FX SELECT – Turn
this knob to select the FX
parameter to use in the software.
Also hold the Shift button while
turning this knob to select the FX to
use in the software.
3. FX PARAM 2 – Turn this knob to
adjust the parameter of the effect,
which will be displayed in the
software.
4. SAMPLE VOLUME – Turn this knob to adjust the volume of a sample in the software. SAMPLE VOLUME 1
and 2 are on the DECK 1 side, and SAMPLES VOLUME for Samples 3 and 4 are on DECK 2 side.
5. SAMPLE VOLUME – Turn this knob toadjust the volume of a sample in the software. SAMPLE VOLUME 1 and
2 are on the DECK 1 side, and SAMPLES VOLUME for Samples 3 and 4 are on DECK 2 side.
6. EFFECT/ DELETE – Press this button to activate or deactivate the effect, which will be displayed in
the software. Hold Shift while pressing this button to enable Delete Cue Mode, so you can erase
assigned Cue Points.
7. EFFECT/ CUE 1 – Press this button to activate or deactivate the effect which will be displayed in the
software. Also hold Shift while pressing this button to assign a Cue Point or return the track to that
Cue Point.
8. SAMPLE 1/ CUE 2 – Press this button to activate or deactivate the sample which will be displayed in
the software. Also hold Shift while pressing this button to assign a Cue Point or return the track to
that Cue Point.
9. SAMPLE 2/ CUE 3 – Press this button to activate or deactivate the sample which will be displayed in
the software. Also hold Shift while pressing this button to assign a Cue Point or return the track to
that Cue Point.
10. LOOP IN/ 1-2 – Press this to set a "Loop In" point where your loop will begin. Also hold Shift while
pressing this button to halve the length of the loop.
11. LOOP OUT/ 2X – Press this to set a "Loop Out" point where your loop will end. Also hold Shift while
pressing this button to double the length of the loop.
12. RELOOP/ LEFT – Press this to jump to the start of the loop and enable it. If the Deck is already
looping when you press it, the Audio Pointer will jump to the start of the loop and continue. (If no loop
is set, nothing will happen.)
13. SMART/ RIGHT – Press this button to adjust the parameter of the effect, which will be displayed in
the software.
14. CUE-MIX-VOLUME – Adjusts the audio level of the Cue channel. Turn to mix between Cue and Program in the
Headphone channel. When all the way to the left, only channels routed to CUE will be heard. When set all the
way right, only the Program mix will be heard.
V
IRTUALDJ LE MAP
7
8
9
10
9
11
1
2 3
4
5
6
4
34
FX PARAM 1
FX SELECT
FX PARAM 2
SAMPLE 1
VOLUME
SAMPLE 2
VOLUME
SAMPLE 1
SAMPLE 2
DELETE
CUE 1
CUE 2 CUE 3
LOOP IN
LOOP OUT RELOOP
SMART
1/2
2X
LEFT
RIGHT
1
2
3
5
4
EFFECT EFFECT
6
10
7
8
9
11
12
13
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Numark N4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Numark N4 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 6,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info