618128
4
Zoom out
Zoom in
Previous page
1/28
Next page
4
MIXTRACK PRO II SETUP
1. Place Mixtrack Pro II on a flat, stable surface.
2. Make sure all devices are turned off and all faders and gain knobs are set to “zero”.
3. If using a microphone, connect it to Mixtrack Pro II’s mic input.
4. Connect Mixtrack Pro II’s outputs to power amplifiers, tape decks, and/or other audio sources.
5. Plug all devices into AC power.
6. When powering everything on, power on your devices in the following order:
Your computer
Any amplifiers, speakers, or output devices
7. Locate the Serato DJ Intro installation card in the box to download and install the software.
8. Open your software program and load music to the decks.
9. Start DJ’ing!
10. When powering everything off, power off your devices in the following order:
Any amplifiers, speakers, or output devices
Your computer
TOP PANEL
1. Browser Knob – Rotate the knob to cycle through folders and tracks. When a folder is selected, press
the knob to enter it. (Press BACK to move up to the previous level.)
2. Load – Press one of these buttons while a track is selected to assign it to Deck A or B, respectively, in
the software.
3. Back – Cycles between the file structure and the music library in the software.
4. Shift – Allows multiple control commands to be triggered when pressed first along with other buttons.
5. Play/Pause – Starts and suspends playback.
6. Cue Button – Sends pre-fader audio to the Cue Channel for headphone monitoring.
7. Cue (Transport Control) – Sets and recalls the main Cue point in the current track. Hold down the
CUE button for temporary play of the cue point. The track will play for as long as the button is held
down and return to the cue point once it is released.
8. Platter/Jog Wheel – This capacitive, touch-sensitive jog wheel controls the audio when the wheel is
touched and moved. When the Scratch button is not active, use the wheel to bend the pitch of the
track. When the Scratch button is active, use the wheel to grab and move the audio, "scratching" the
track as you would with a vinyl record. You can also grab the non-touch-sensitive outer wheel to bend
the pitch of the track.
9. Scratch – Controls the behavior of the platters. When not active, the platter will function as Pitch Bend.
When active, the platter will have the ability to scratch.
10. Pitch Fader – Controls the tempo (speed) of the individual decks.
11. Pitch Bend Down – Press and hold to momentarily reduce the speed of the track.
12. Pitch Bend Up – Press and hold to momentarily increase the speed of the track.
6
6
14
14
14
14
12
12
14
14
14
14
14
14
14
14
15
15
11
11
12
12
11
11
10
10
10
10
13
13
13
13
5
5
20
20
21
21
22
22
23
23
27
27
27
27
28
28
28
28
30
30
20
20
21
21
22
22
23
23
26
26
24
24
25
25
24
24
32
32
32
32
7
7
29
29
29
29
17
17
18
18
19
19
17
17
18
18
4
1
3
2
2
8
8
15
15
4
16
16
31
31
9 9
16
16
19
19
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Numark Mixtrack Pro II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Numark Mixtrack Pro II in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 7,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info