Manual Numark Mixtrack II (page 5 of 32) (English, German, French, Italian, Spanish)

618129

Zoom out

Zoom in

1/32

20. FX 1 On/Off – Turns FX 1 on and off per deck. Hold Shift + FX 1 to set and start playback of a 1-beat

autoloop.

21. FX 2 On/Off – Turns FX 2 on and off per deck. Hold Shift + FX 2 to set and start playback of a 2-beat

autoloop.

22. FX 3 On/Off – Turns FX 3 on and off per deck. Hold Shift + FX 3 to set and start playback of a 4-beat

autoloop.

23. Reset – Press this pad to reset the filter. Hold Shift + Reset to set and start playback of a 16-beat autoloop.

24. Channel Volume – Adjusts the volume of the individual channels in the software.

25. Master Volume – Adjusts the volume of the master mix coming from the software.

26. Crossfader – Controls the blend between the two decks.

27. High EQ – Controls the treble frequencies for the individual channels.

28. Mid EQ – Controls the mid range frequencies for the individual channels.

29. Low EQ – Controls the bass frequencies for the individual channels.

30. Cue Gain – Adjusts the volume for headphone cueing in the software.

31. Cue Mix – Adjusts the software’s audio output to the headphones, mixing between the cue output and the

master mix output.

32. Stutter – Press this button while the music is playing to jump back to the last set cue point, creating a "stutter"

effect.

PAD MODE COMMANDS

The lower row of pads has different functions depending on their mode: Looping Mode, Sample Mode, or Hot Cue

Mode. To select a mode, hold down the SHIFT button and press one of the lower pads. A LED under the pad section

indicates the currently selected mode.

Looping Mode: Press Shift + Loop In to assign the lower 4 pads to the functions listed below:

• Loop In – Sets the beginning of a loop. After a Loop Out point is set and this button is pressed again, it will return

the playback marker to the Loop In point.

• Loop Out – Sets the end point for the loop. When this button is pressed again after a Loop Out point has been

set, it will exit out of the loop.

• Reloop – If a loop has not been set, this button will create a loop from the start of the song or where Loop In was

pressed. Please note that when pressing Reloop without first setting a loop point will create a loop that has a loop

length of the auto loop length.

• Loop x1/2 – Cuts the currently playing loop in half. Press

Shift + Loop x1/2 to double the length of the currently

playing loop.

Sample Mode: Press Shift + Loop Out to assign the lower 4 pads to the functions listed below:

• Sample 1 (S1) – Plays the sample assigned to Sample Pad 1.

• Sample 2 (S2) – Plays the sample assigned to Sample Pad 2.

• Sample 3 (S3) – Plays the sample assigned to Sample Pad 3.

• Sample 4 (S4) – Plays the sample assigned to Sample Pad 4.

Hot Cue Mode: Press Shift + Reloop to assign the lower 4 pads to the functions listed below:

• Cue 1 (C1) – If a cue point has not already been set for the loaded track, this control will mark Cue Point 1. If a

cue point has already been set, this control will jump to Cue Point 1.

• Cue 2 (C2) – If a cue point has not already been placed on the loaded track, this control will mark Cue Point 2. If a

cue point has already been set, this control will jump to Cue Point 2.

• Cue 3 (C3) – If a cue point has not already been placed on the loaded track, this control will mark Cue Point 3. If a

cue point has already been set, this control will jump to Cue Point 3.

• Cue 4 (C4) – If a cue point has not already been placed on the loaded track, this control will mark Cue Point 4. If a

cue point has already been set, this control will jump to Cue Point 4. Shift + Cue 4 will set “Cue Delete Mode”.

Pads with cue points set will flash, and when pressed the cue point will be removed. Exit Cue Delete Mode by

pressing Shift + Cue 4 again.

COMBINATION KEYS

Shift + Pitch Bend - = Allows you to change the tempo of the track without changing the original key of the song (0%

pitch).

Shift + Pitch Bend + = Adjusts the range of the pitch fader in the software.

Shift + FX Control = Selects the effect.

Shift + FX 1 = Sets and starts playback of a 1-beat autoloop.

Shift + FX 2 = Sets and starts playback of a 2-beat autoloop.

Shift + FX 3 = Sets and starts playback of a 4-beat autoloop.

Shift + Tap = Sets and starts playback of a 16-beat autoloop.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Numark Mixtrack II in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 8,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Numark Mixtrack II Manual

Product: