618163

Numark M4 Manual

6
Zoom out
Zoom in
Previous page
1/24
Next page
4
TOP PANEL FEATURES
1. POWER LED – Illuminates
when the mixer is on.
2. MIC TREBLE – Adjusts the
high (treble) frequencies of the
microphone channel.
Tip: If you experience feedback
when using a microphone at
loud levels, try turning down the
high frequencies.
3. MIC BASS – Adjusts the low
(bass) frequencies of the
microphone channel.
4. MIC GAIN – Adjusts the audio
level of the microphone signal.
5. INPUT SELECTOR – Selects
the input source to be routed to
the corresponding channel.
Input jacks are located on the
rear panel.
6. CHANNEL GAIN – Adjusts the
corresponding channel’s pre-
fader and pre-EQ gain level.
7. CHANNEL TREBLE – Adjusts
the high (treble) frequencies of
the corresponding channel.
8. CHANNEL MID – Adjusts the
mid-range frequencies of the
corresponding channel.
9. CHANNEL BASS – Adjusts the
low (bass) frequencies of the
corresponding channel.
10. CHANNEL FADER – Adjusts
the audio level on the
corresponding channel.
11. CUE MODE SELECTOR – Selects the audio that is sent to the headphones. Switch it to “CH1”, “CH2,” or
“CH3” to hear Channels 1, 2, or 3 in the Cue channel.
12. CUE BLEND – Turn to mix between Cue and Program in the headphones. When all the way to the left, only
channels routed to CUE will be heard. When all the way right, only the Program mix will be heard.
13. CUE GAIN – Adjusts the level of the headphone audio.
14. MASTER – Adjusts the output volume of the Program mix.
15. STEREO LEVEL INDICATOR – Measures the audio level of the Program mix.
16. METER ASSIGN – Determines whether audio from the Program mix or the Cue channel is sent to the
STEREO LEVEL INDICATOR.
17. HEADPHONES – Connect your ¼” headphones to this output for cueing and mix monitoring. Headphone
output controls are located on the top panel.
18. CROSSFADER – Blends audio playing between Channels 1 and 3. Sliding this to the left plays Channel 1 and
sliding to the right plays Channel 3.
Note: The crossfader is user-replaceable if it should ever wear out. Simply remove the facepanel, then remove
the screws holding it in position. Replace the fader with a quality authorized replacement from your local
Numark retailer only.
19. CROSSFADER (CF) SLOPE – Adjusts the slope of the crossfader curve. Flip switch to the left for a smooth
fade (mixing) or to the right for a sharp cut (scratching).
20. CROSSFADER (CF) MODE – Reverses the assignment of Channels 1 and 3 on the crossfader.
1
5
18
17
5 5
2
3
4
6
7
8
9
10
6
7
8
9
10
6
7
8
14
16
11
15
13
12
9
10
19
20
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Numark M4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Numark M4 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 6,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info