23484

Numark DM1635 Manual

14
Zoom out
Zoom in
Previous page
1/20
Next page
DM 1635
BEATKEEPER TROUBLESHOOTING
T1 The BPM goes way off when using the search
button on my high tech CD mixer.
Some high tech CD mixers have a cueing feature which
allows you to cue precisely to an exact spot in the music so
you can slam mix. The only problem is that this mode repeats
the first beat of the music at a rate which is unrelated to the
actual BPM of the music. As a result, the BPM goes off track.
The best way to avoid this is to restart the music after a
search, make sure the Beatkeeper is resynced to the music
and then press the Cue button on the CD player. The
Beatkeeper will remember the BPM and track the music
once it starts.
T2 The Beatkeeper doesn't resync to the
downbeat of the music when the music restarts.
Either the downbeat isn't strong enough to be detected,
or the music was started well before a strong downbeat.
You can easily resync to the downbeat by tapping the Beat
Assist button once with the beat. Alternatively you can cue
the music to a strong downbeat so that the Beatkeeper
starts on this downbeat.
T4 Either the BPM display is blank, or it is
noticeably off.
This is common at the beginnings of songs where the beat
is not well defined. To sync simply tap the Beat Assist button
two or more consecutive times on the downbeat. The Sync
Lock LED turns on automatically, indicating that the
Beatkeeper is now tracking the beat of the music.
T5 The BPM display is correct, but the beat LED
isn't flashing on the downbeats of the music.
If this happens tap the Sync Lock button (turning the Sync
Lock LED on) and tap the Beat Assist button once to make
the Beatkeeper track the downbeat. You can also use this to
force the Beatkeeper to track an offbeat for more advanced
mixing.
Alternatively you may sync manually by tapping the Beat
Assist button 2 or more times on the beat.
T6 The Beats per minute number seems to jump
all over the place.
The Beatkeeper is analyzing different sections of the
music to find the BPM. If there is a temporary suspension of
a distinct beat or if the rhythm is too complex, this number
may not follow the actual BPM.
a) You can wait for a passage of music with a steady beat
for a more accurate BPM indication.
b) Hit the Sync Lock button once the red beat LED starts
following the beat
or c) Tap the Beat Assist button at least twice along with
the music beat.
Either method (b or c) will cause the Sync Lock LED to turn
and lock on, indicating that the Beatkeeper is now tracking
the music.
T7 It takes too long for the Beatkeeper to find
the beat on its own.
To speed up the BPM detection process, tap the Beat
Assist button at least twice. At this point, the Beatkeeper will
turn on the Sync Lock LED, immediately providing a BPM
estimate, while resynchronizing to the beat you tapped.
Numark - The Proven Leader in DJ Technology
©1997 Numark Industries 14 http://www.numark.com
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Numark DM1635 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Numark DM1635 in the language / languages: English as an attachment in your email.

The manual is 0,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info