23484
7
Zoom out
Zoom in
Previous page
1/20
Next page
DM1635
GUIDED TOUR OF FEATURES AND OPERATING
INSTRUCTIONS...
If the DM1635 is your first mixer, please read this entire
manual before you begin operation.
If you are an experienced DJ simply replace your old
mixer. The DM1635 can be rack-mounted or used as a
free-standing unit (five 19" rack unit spaces).
INSTALLATION AND OPERATION
Study the Connections Diagram on page 13. First,
connect all stereo input sources. Next connect your
microphone(s) and monitor headphones. Make sure all
faders are at "zero" and the unit is off. Finally, connect
the stereo outputs to the power amplifier(s) and/or audio
sources. Plug the DM1635 into AC power. Now you
are ready to switch it on.
The DM1635 is divided into six functional blocks:
Input, Crossfader, DJ Mic, Master/Booth Output,
Equalizer, and BEATKEEPER. It is important to learn
how each of these work.
CHANNEL INPUTS/CONTROLS SECTION
1. Channels 1, 2, 3 & 4 Input Toggle Switches
select which source will be live to that channel based on
what you have connected to the rear panel input
section.
2. The Input Faders are low-noise, low-impedance,
high-quality, smooth Alps™ faders. These control
individual source levels in the mix.
3. Channel Cue Assign. The Cue pushbuttons are
used to route channel audio to the Monitor Section.
The channel faders do not control the Cue send
volume.
4. Effect Send (Channels 1-4). Depress these
buttons when you want the signal from any input
channel to be routed to the Send Out Jacks. The
channel faders do not affect the signal levels which are
routed to the send output.
CROSSFADER SECTION
5. The Crossfader Assign knob to the left of the
crossfader lets you choose which input channel will be
heard when the crossfader is in the far left position.
6. The Replaceable Crossfader achieves clean
segues between the two selected input channels.
Off1 2 3 4
Off1 2 3 4
"Hard left" selects the channel set up of the Assign
Left knob. In this example it is Channel 1. "Hard right"
selects the channel set up on the Assign Right
knob. In this example it is Channel 4. With the
crossfader centered both assigned channels are live.
Use the crossfader for fast and seamless segues from
one selected channel to the other. To turn off the
crossfader simply turn both knobs all the way to the
left.
Note: The crossfader is user replaceable in case of
failure. Simply unscrew the two large screws which
hold it in place, lift it out and disconnect it’s cable. Re-
attach the new crossfader and screw the mounting
plate back onto the unit - you’re back in business!
7. The Crossfader Assign knob to the right of the
crossfader lets you choose which input channel will be
heard when the crossfader is in the far right position.
Numark - The Proven Leader in DJ Technology
©1997 Numark Industries 7 http://www.numark.com
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Numark DM1635 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Numark DM1635 in the language / languages: English as an attachment in your email.

The manual is 0,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info