23488
8
Zoom out
Zoom in
Previous page
1/16
Next page
DM1125
DM1125 FRONT PANEL DIAGRAM...
1
2
3
4
5
6
7
8
9
10
12
13
14
15
16
17
18
19
20
29
30
31
27
26
25
GUIDED TOUR OF FEATURES AND
OPERATING INSTRUCTIONS...
Please read this entire manual before you begin operation.
INSTALLATION AND OPERATION
Study the Connections Diagram on page 13. First,
connect all stereo input sources. Next connect your
microphone(s) and monitor headphones. Make sure all
faders are at "zero" and the unit is off. Finally, connect the
stereo outputs to the power amplifier(s) and/or audio
sources. Plug the DM1125 into AC power. Now you are
ready to switch it on.
The DM1125 is divided into five functional blocks: Input,
Crossfader, DJ Mic, Master/Zone Output, and Equalizer. It
is important to learn how each of these work.
CHANNEL INPUTS/CONTROLS SECTION
1. Channels 1, 2, & 3 Input Toggle Switches
select which source will be live to that channel based on
what you have connected to the rear panel input section.
2. The Input Faders are low-noise, low-impedance, high-
quality, smooth Alps™ faders. These control individual
source levels in the mix.
3. Channel Cue Assign. The Cue pushbuttons are
used to route channel audio to the Monitor Section.
The channel faders do not control the Cue send volume.
CROSSFADER SECTION
4. The Crossfader Assign knob to the left of the
crossfader lets you choose which input channel will be
heard when the crossfader is in the far left position.
5. The Replaceable Crossfader achieves clean
segues between the two selected input channels.
Off1 2 3
Off1 2 3
"Hard left" selects the channel set up of the Assign Left
knob. In this example it is Channel 1. "Hard right" selects
the channel set up on the Assign Right knob. In this
example it is Channel 3. With the crossfader centered both
assigned channels are live. Use the crossfader for fast and
seamless segues from one selected channel to the other.
To turn off the crossfader simply turn both knobs all the
way to the left.
Note: The crossfader is user replaceable in case of failure.
Simply unscrew the two large screws which hold it in place,
lift it out and disconnect it’s cable. Re-attach the new
crossfader and screw the mounting plate back onto the
unit - you’re back in business!
6. The Crossfader Assign knob to the right of the
crossfader lets you choose which input channel will be
heard when the crossfader is in the far right position.
Numark - The Proven Leader in DJ Technology
©1998 Numark Industries 8 http://www.numark.com
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Numark DM1125 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Numark DM1125 in the language / languages: English as an attachment in your email.

The manual is 0,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info