23470
8
Zoom out
Zoom in
Previous page
1/12
Next page
DM1001X/DM1002X
DM1001X/DM1002X REAR PANEL DIAGRAM...
REAR PANEL: INPUTS AND OUTPUTS
1
2
3 4 5 6 5 6
7 7
1. Power Connection. Plug your power adapter in
here. See safety precautions on page 3 for proper
treatment of the power cord.
2. GND is the grounding lug for all turntables. Always
use this connection (your turntable cable should have a
grounding wire).
3. The Stereo Main Outputs are low-impedance
RCA connectors controlled by the Master fader.
4. The Record Outputs are designed to be hooked
up to your tape deck’s input jacks.
5. The Phono Inputs use unbalanced RCA jacks.
Your input signal is fed directly to your mixer’s high-
quality RIAA phono pre-amplifiers so use this position
only for moving magnet cartridges. Line level sources
will overload the sensitive phono pre-amps and will
sound very bad, so always be sure to toggle the
line/phono switch over to line before connection of line
sources.
6. The Phono/Line Inputs are unbalanced RCA
jacks. The Line Input is selected with the
Line/Phono Input switch above it.
You can connect stereo audio from HiFi VCRs, cassette
and reel-to-reel tape decks, DAT machines, CD players,
laser discs, tuners, even synthesizers or other mixing
consoles.
NOTE: Plug mono audio sources into both Left and
Right inputs using a “Y” cable connector.
Warning: make sure the LINE/PHONO input
switch is set to line before playing any line
input level devices through your mixer
8. Line/Phono Input switch. Use this to allow line
level equipment to be plugged into your phono inputs.
Numark - The Proven Leader in DJ Technology
©1998 Numark Industries 8 http://www.numark.com
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Numark DM1002X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Numark DM1002X in the language / languages: English as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info