24741
8
Zoom out
Zoom in
Previous page
1/14
Next page
CM1000/CM1000R
- The Leader in DJ Technology
©2000 Industries - 8 - http://www.numark.com
FRONT PANEL FEATURES
1
2
3
4
5
7
6
8
9
10
14
13
12
11
15
1617 18
26
20
19
23
22
21
24
25
1
INPUTS
1. Input faders - control individual source levels in
the mix.
2. Pre-fader Gain Controls – adjust the pre-fader
volume for cleaner sound.
3. PFL Meter - used to adjust the PFL levels,
accurately match channel levels with the Pre-fader
gain controls before mixing them together. The idea
is to properly match PFL inputs. You should not
attempt to match the input with the stereo output
meter!
4. Channel Input Selector – determines what input
source is controlled by the channel.
MICROPHONE
5. Mic Gain Controls – Controls the volume of the
microphones
6. Mic Activation Switch – turns microphone input on
and off.
7. Treble and Bass Controls – for fine-tuning the tone
of your voice on both mics through the sound
system. The controls are detented for setting tone
"flat".
8. Auto-Talkover Switch- reduces the input level of
Channels 1-4. This works with the auto talk-over
sensitivity adjustment on the rear panel. Talkover is
very useful for making announcements without
adjusting any levels.
HEADPHONE CUEING
9. Channel Cue Assign - are used to route Pre Fader
Level (PFL) channel audio to the Monitor Section.
The channel faders do not control the Cue volume.
10. Split/Blend Cue – controls how PFL and Program
audio are sent to your headphones. In split mode,
the PFL audio can be heard in your left ear and
PGM audio can be heard in your right ear. In blend
mode, both PFL and PGM can be heard in both ears.
11. Headphone Mix - controls the mix of PFL and
PGM signals to your headphones. When the slider
is moved to the left, all you will hear is the cue
source. When the slider is all the way to the right,
you will hear what is playing through the master
output. By blending, beats can be matched exactly
and segues can be smooth when a song is cued.
12. Headphone Level – adjusts cue volume.
13. Headphone output – ¼” jack for your headphones.
14. Booth Output – controls the volume of booth
monitor speaker if attached. Can also be used as an
additional zone or lighting control
15. Booth source switch – routes either program audio
or cue selected audio to the booth output. In “CUE”
mode the output audio matches selections made for
the headphones. For instance, in split cue mode you
would here cued audio in the left booth speaker and
program audio in the right booth speaker. Balance
would be controlled by the blend control. In this
way mixing can be done without headphones.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Numark CM1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Numark CM1000 in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info