Manual Nuk Eco Control Video Display 550VD - 10749102 (page 32 of 36) (English)

803238

Zoom out

Zoom in

1/36

The setting will be stored, the menu will

be closed, and the parent unit will return

directly to monitoring mode.

The lullabies will play for the set time.

The corresponding symbol will be shown

in the status bar with a T to show that the

timer is active.

Note: After 15 seconds without any input

from you, the menu will be closed with the

settings unchanged and the parent unit will

return directly to monitoring mode.

8. To switch the timer off, select the option

OFF in this submenu.

6.12 Vibrating alarm

The parent unit is equipped with an inte-

grated vibrating alarm function. It is auto-

matically activated when you set the sound

volume to its lowest level, switching the par-

ent unit to mute (see "6.14 Mute function"

on page 71). It can also be activated if

required, e.g. for providing an additional

alarm notification function, and can be par-

ticularly helpful for the hard of hearing, in

addition to the visual information shown on

the screen and by the LEDs.

The parent unit will vibrate:

• if there is a high level of noise in the

monitored room

• when the battery charge becomes low

• if the parent unit goes out of range

• if the parent unit is unable to set up a

connection with the baby unit and/or if

the connection is interrupted

• if the temperature in the monitored room

rises above or falls below the set limits

• when a reminder alarm is signalled

• once, when the vibrating alarm is

activated

• once, when the parent unit is switched to

mute.

Note: If the parent unit is switched to mute

(see "6.14 Mute function" on page 71), the

vibrating alarm is automatically activated

and cannot be deactivated. This gives par-

ents a better chance of noticing an alarm or

warning on the device. In this case, the

vibrating alarm can only be deactivated by

raising the volume setting.

Activating the vibrating alarm

To activate the vibrating alarm, proceed as

follows:

1. Press the button 26.

The menu bar with the main menu will

appear at the bottom of the screen.

2. Use the 24 or 27 button to

select the Vibrating alarm menu.

The selected symbol will be shown in red.

3. Press the button 26 to view the sub-

menu.

ON: Vibrating alarm will be activated.

OFF: Vibrating alarm will be deactivated.

The active setting will be shown in green.

4. Use the 25 or 28 button to move the

star in front of "ON".

At this point, you can still exit the sub-

menu by pressing the button 27. The

submenu will close and you will be

returned to the previous submenu. How-

ever, to continue with your settings, con-

tinue with the next step.

5. Press the button 26 to confirm your

setting.

The setting will be stored, the menu will

be closed, and the parent unit will return

directly to monitoring mode.

The corresponding symbol appears in the

status bar. The parent unit will now also

vibrate when an alarm is signalled.

Deactivating the vibrating alarm

To deactivate the vibrating alarm, proceed

as follows:

1. Press the button 26.

The menu bar with the main menu will

appear at the bottom of the screen.

2. Use the 24 or 27 button to

select the Vibrating alarm menu.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nuk Eco Control Video Display 550VD - 10749102 in the language / languages: English as an attachment in your email.

The manual is 0.54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nuk Eco Control Video Display 550VD - 10749102 Manual

Product: