Manual Nuk Eco Control Audio 530D plus - 10256440 (page 15 of 22) (English)

803240

Zoom out

Zoom in

1/22

hear your baby nor see the level of noise in

the nursery. We therefore recommend that

you always leave at least one transmission

active.

6.6 Using the VOX function to

adjust the transmission

sensitivity

Babies make a lot of different noises. These

can range from loud breathing through

babbling to calling or loud crying. The VOX

function can be set up in such a way that

only loud sounds such as crying or calling

are transmitted while quieter sounds are not

registered.

The VOX function sets up the transmission

sensitivity of the microphone. The higher the

VOX level the more sensitive the device is to

noises.

1. You activate the VOX function by briefly

pressing the VOX button 20.

The LEDs 19 indicate the sensitivity of

the current setting by flashing.

2. You can increase or decrease the

transmission sensitivity by pressing one

of the VOL + 13 or VOL - 14 buttons. The

number of flashing LEDs 19 corresponds

to the selected level:

– VOX level 1 = extremely low sensitivity,

reacts only if baby screams very loudly;

– VOX level 2 = low sensitivity, reacts if

baby screams loudly;

– VOX level 3 = normal sensitivity, reacts

if baby cries normally;

– VOX level 4 = high sensitivity, reacts

even to slight sounds;

– VOX level 5 = Eco-Mode is switched

off. The unit is set to transmit continu-

ously.

You can set up the volume at which the parent

unit should output the transmitted sounds

using the two VOL + 15 and VOL - 16 buttons

(see "6.4 Adjusting the volume control" on

page 36).

Note: After activating the VOX function, you

have about two seconds to alter the

transmission sensitivity. The device will then

automatically switch back to transmitting

sounds. You can see this has happened

because the LEDs 19 will no longer be

flashing, and the VOL + 13 and VOL - 14

buttons now only modify the volume.

Caution! In continuous transmission mode

at VOX level 5, all sounds are transmitted

continuously. When the baby is sleeping

peacefully, the volume is automatically

reduced to its lowest level after a few

seconds to minimise background noise. As

soon as the child begins to make a noise,

the volume automatically returns to its

previous setting.

6.7 Talking to your baby

You can use the “Talk back” function to

speak to your baby.

1. Hold down the TALK 22 button on the

parent unit.

The display 15 shows

the TALK symbol.



2. At the same time, speak into the

microphone 25 on the parent unit.

Your baby can now hear your voice from

the loudspeaker 2 on the baby unit.

3. Release the TALK 22 button in order to

hear the baby’s reaction.

The TALK symbol disappears.

Notes:

– If the baby unit 1 is in Eco-Mode, this

function is deactivated so that you do

not inadvertently wake your baby. In

this case, two consecutive beeps will

remind you that the talk-back function

is currently not available.

– The display 15

shows a flashing

TALK symbol.

– If the volume of the parent unit is set to

“MUTE” (see "6.5 Mute setting" on

page 36), it will automatically be

increased to level 1 as soon as you

press the TALK 22 button.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nuk Eco Control Audio 530D plus - 10256440 in the language / languages: English as an attachment in your email.

The manual is 0.42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nuk Eco Control Audio 530D plus - 10256440

Nuk Eco Control Audio 530D plus - 10256440 User Manual - German - 27 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nuk Eco Control Audio 530D plus - 10256440 Manual

Product: