803236

Nuk Eco Control Audio 530D - 10256439 Manual

12
Zoom out
Zoom in
Previous page
1/22
Next page
34
5. Operating the baby unit
5.1 Switching the baby unit on
and off
The baby unit 1 will switch on automatically
as soon as you have connected the mains
adapter and plugged it into the power
supply. You can subsequently switch the
baby unit on or off at any time:
• To switch the baby unit 1 on or off, press
the On/Off button 7.
5.2 Indicator LEDs
• The Power LED 9 lights up green while
the baby unit is switched on.
• The VOX LED 10 on the baby unit lights
up green when there is an established
connection between it and the parent
unit.
• The VOX LED 10 will not be lit while the
baby unit 1 is switched to Eco-Mode or if
it was not possible to set up a connection
to the parent unit.
5.3 Lullabies
This NUK babyphone has four especially
composed lullabies and soothing natural
sounds to help you soothe your baby and
lull it to sleep.
1. To activate the lullabies on the baby unit 1,
press the Lullabies on/off button 6.
Note: The lullabies can also be activated
from the parent unit 11 (see
"6.8 Lullabies" on page 38).
2. You can change the current song by
holding down the Lullabies on/off
button 6. This automatically goes on to the
next song.
The previously selected lullaby will play in
a loop for about 20 minutes and will then
automatically switch off.
5.4 Nightlight
The baby unit’s soft nightlight helps your
baby recognise things in the dark room,
which it finds soothing.
• You turn the nightlight on or off by briefly
pressing the Nightlight on/off button 8.
Notes:
– If you press and hold the Nightlight
on/off button 8, this activates the
Paging function (see "Call function of
parent unit“ on page34).
– The nightlight can also be activated
from the parent unit 11 (see
"6.9 Nightlight" on page 38).
5.5 Call function of parent unit
If you misplace the parent unit and are
unable to find it, you can use the “Paging”
function to search for it.
1. You activate the function by holding
down the Nightlight on/off button 8.
When the function has been activated,
the baby unit will beep once and the
parent unit will then begin to emit a
continuous series of beeps that will
enable you to locate it.
Notes:
– The parent unit emits these beeps at
the volume you previously selected
(see "6.4 Adjusting the volume control"
on page 36). If the volume is set to its
lowest level, then the beeps will also be
extremely quiet.
– If the parent unit is muted then it will
not emit any beeps; and the baby unit
will emit a double beep to indicate this:
one beep: Search function has been
activated
two beeps: the search function cannot
be activated because there is currently
no connection to the parent unit. The
parent unit is either switched off, or out
of range, or currently muted.
2. You turn the function off either by again
pressing and holding the Nightlight on/
off button 8, or by pressing any of the
buttons on the located parent unit.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nuk Eco Control Audio 530D - 10256439 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nuk Eco Control Audio 530D - 10256439 in the language / languages: English as an attachment in your email.

The manual is 0.42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info