803236

Nuk Eco Control Audio 530D - 10256439 Manual

9
Zoom out
Zoom in
Previous page
1/22
Next page
31
data (see "9. Technical data" on
page 41).
6. Initially, charge the parent unit
continuously for 10 hours to activate the
full battery capacity (see "4.4 Power
supply" on page 31).
4.2 Connecting the baby unit
Note: Don’t install the baby unit 1 until the
battery of the parent unit 11 is fully charged.
1. Put the baby unit 1 somewhere in the
nursery where your baby will not be able
to reach it.
An optimal distance between baby and
the baby unit is from 1 to 2 m.
2. Insert the mains adapter plug into the
socket 3 of the baby unit 1.
3. Insert the plug into a power socket that
matches the rating given in the technical
data (see "9. Technical data" on
page 41).
4.3 Connecting baby unit and
parent unit
1. Use the On/Off button 7 to switch the
baby unit 1 on. Keep the button pressed
for a moment until the Power LED 9 lights
up.
2. Use the On/Off button 17 to switch the
parent unit 11 on. Keep the button
pressed for a moment until the LED 18
lights up green.
The connection will be set up
automatically. While this is being done
the connection indicator 16 will light up
red.
As soon as the connection has been
established, the connection indicator on
the parent unit 16 and the VOX LED on
the baby unit 10 will light up green.
If the connection indicator 16 begins to
flash green, this means that there is a
connection between the parent unit and
the baby unit, but your baby is currently
asleep and therefore the device has
automatically activated Eco-Mode to
reduce the high-frequency radiation in
the children’s room and save energy.
In the event that the connection between
the parent unit and the baby unit breaks
down, the devices will automatically attempt
to establish a new one.
If a new connection is not established within
30 seconds, the parent unit 11 will emit a
regular beep and the connection
indicator 16 will light up red. You may need
to move the parent unit to a different
location before a new connection can be
established.
3. First go and check on baby to make sure
everything is OK.
4. Then try to set up a new connection by
moving about.
The connection will be automatically re-
established as soon as you are within
range.
As soon as the connection has been set
up the connection indicator 16 will again
light up green.
4.4 Power supply
• The power supply for the baby unit 1
works only via the mains adapter.
• The parent unit 11 can be operated using
the battery with no mains connection for
up to 18 hours.
Displays
The level of charge in the battery is indicated
by the LED POWER 18. While the parent unit
is switched on, its level of battery charge is
indicated by the additional battery symbol in
the display:
LED 18 is green
and continuously
on
Battery is fully charged
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nuk Eco Control Audio 530D - 10256439 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nuk Eco Control Audio 530D - 10256439 in the language / languages: English as an attachment in your email.

The manual is 0.42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info