803241
12
Zoom out
Zoom in
Previous page
1/15
Next page
30
7.2 Changing the battery
The installed 3.7V 1200 mAh lithium polymer
battery (LiPo) may be replaced only by a
genuine replacement battery as used by us.
If necessary please contact our Product
Service (see "Product service babyphone in
Europe“ on page116).
1. Remove the battery cover 9 on the back
of the parent unit 8, by sliding it
downwards.
2. Remove the defective battery.
3. Put the new battery in its compartment
as indicated on the unit. Make sure you
insert it with the correct polarity (+ and -).
4. Slide the battery cover 9 back onto the
parent unit 8.
5. Initially, charge the parent unit
continuously for 10 hours to activate the
full battery capacity (see "4.1 Connecting
the parent unit" on page 24).
8. Faults and how to remedy them
Fault Cause Remedy
Baby unit or
parent unit does
not work
No power supply Set up the power supply (see "4.4 Power
supply" on page 26)
Battery of parent unit is empty Charge the battery (see "4.4 Power supply"
on page 26)
The unit is not switched on Switch it on (see "4.1Connecting the parent
unit" on page 24 and "4.2Connecting the
baby unit" on page 25)
The baby unit and parent unit are
too far apart, or the signal is being
blocked by solid walls or other
electrical equipment
Reduce the distance or place the parent
unit somewhere else
Loud whistling Feedback due to the parent unit
and baby unit being too close
together
Increase the distance to at least 2 – 3 m
Reduce the volume and the VOX level on
the parent unit if you are in the immediate
vicinity of the baby unit (see "6.3Using the
VOX function to adjust the transmission
sensitivity" on page 28 and "6.4Adjusting
the volume control" on page 29).
Parent unit is
beeping
Connection to the baby unit has
been lost
Set up the connection (see "4.3 Connecting
baby unit and parent unit" on page 25)
Problem with the power supply Check the power supply (see "4.4Power
supply" on page 26)
Connection
indicator
13 has lit
up red
The parent unit is out of range Set up the connection (see "4.3 Connecting
baby unit and parent unit" on page 25)
No sound from the
parent unit
Volume is muted Increase the volume (see "Mute setting“ on
page29)
VOX function is set too low Increase the transmission sensitivity (see
"6.3Using the VOX function to adjust the
transmission sensitivity" on page 28 and
"3.1Brief overview of messages" on page
24)
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nuk Eco Control Audio 500 - 10256438 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nuk Eco Control Audio 500 - 10256438 in the language / languages: English as an attachment in your email.

The manual is 0.23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nuk Eco Control Audio 500 - 10256438

Nuk Eco Control Audio 500 - 10256438 User Manual - English - 15 pages

Nuk Eco Control Audio 500 - 10256438 User Manual - German - 20 pages

Nuk Eco Control Audio 500 - 10256438 User Manual - Dutch - 16 pages

Nuk Eco Control Audio 500 - 10256438 User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info