803279
14
Zoom out
Zoom in
Previous page
1/86
Next page
12
The surfaces and heating element of the
sterilizer become extremely hot during
operation. Therefore, only touch the handles
or switches.
Do not immerse the appliance in water or
use it outdoors.
The appliance must not be operated with an
external time switch or separate remote
control system, such as a wireless remote
control socket.
Always disconnect the plug before cleaning
the appliance.
1.3 General information
These operating instructions should be
read carefully before use. They are part
of this equipment and must be kept
readily available at all times.
The appliance should be used solely for
the intended purpose as described (see
“2.1Purpose“ on page13).
Warning!
Non-observance of the intended
purpose and the following
warnings may result in injury.
You should ensure that the mains cable
is never in a position where someone
can trip on it, become caught in it or
step on it.
Caution!
Non-observance of the following
warnings may result in damage to the
equipment.
Check whether the required voltage is
the same as your local voltage (see
nameplate on appliance).
The appliance must always be placed on
a surface that is firm, even, dry, heat-
resistant and non-flammable.
The appliance should never be placed in
the vicinity of hot surfaces, in heated
ovens or in the vicinity of gas or
electrical appliances, as this may cause
damage to the appliance.
Never operate the appliance without
water, as it could overheat.
Never leave the appliance unsupervised
during operation, so that you can
intervene in good time if it malfunctions.
1.4 Protection against
burning and scalding
Warning!
As the appliance
operates at high temperatures,
non-observance of the following
warnings can result in burns or
scalds.
During the sterilizing process and
immediately after switching off, there is
still hot steam in the appliance, some
escaping from steam vent
1
, so take
care not to scald yourself. Do not reach
across steam vent
1
! Allow the appliance
to cool down for at least 3 minutes
before opening it.
Do not touch the heating element after
opening the appliance. It remains hot
after switch-off much longer than other
appliance parts.
Do not transport the steam sterilizer
whilst it is in operation. If you do need to
move the appliance when hot, switch it
off first, remove the plug and wait until it
cools down. Otherwise the surface could
cause scalding.
Bottles and accessories are very hot
immediately after being sterilized and
should only be removed using the bottle
tongs enclosed.
1.5 Protection against
electric shock
Warning!
The following safety
instructions should protect you
against an electric shock.
Only use the appliance if both appliance
and mains cable are intact.
If the mains cable is damaged it must be
replaced by the manufacturer, his
customer service engineer or a similarly
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nuk 10251013 2PIN Vario Express at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nuk 10251013 2PIN Vario Express in the language / languages: English, German, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 1.55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info