589435
11
Zoom out
Zoom in
Previous page
1/40
Next page
11
manual stop, the instrument sets itself back by default in the auto-stop
state. Releasing the button during the countdown, brings back the default
screen on the instrument.
Basic Measuring Mode
(Standard Screen)
Reminder : All the basic modes that are described hereafter are
available on the same screen ( standard screen), only the special
modes avail of a screen per mode (see relevant section).
The last measuring mode displayed on a block becomes the default
mode for this block; when you turn your instrument off and back on
again (instantaneous and normal states), the configuration of your
standard screen will be the same as that displayed when the instrument
was turned off.
General Use of Buttons
SELection Button: a brief push of the button selects a block of the
standard screen or a special screen, the block flashes when it is
selected (the selection/flashing time is 5 seconds). When settings
are entered or when looking at data, pressing it briefly makes it
possible to change the direction of the adjustment. As a rule,
pressing the button for 2 seconds will bring the standard screen
back up, allow to terminate a calibration, or exit the special menu.
By pressing it for a long time (3 seconds) in a flashing state it is
possible to access the settings of a number of values. If the
standard screen is normal (not flashing), pressing the button for a
long time will turn off the instrument.
LUMminosity Button: a brief push of the button switches on the
backlighting for 5 seconds, or turns it off if it is already on.
Pressing the button for 1 second turns on the backlighting for a
duration of 20 seconds. Activating a button when the backlighting
is on, keeps it on for another 20 seconds, this in order to stop it
from switching off while performing an adjustment for instance.
Pressing the button for a long time turns off the instrument.
MODification Button: a brief push of the button changes the
display of the selected block and gives access to the memories.
Pressing the button for a long time makes it possible to change the
unit of measurement of the selected block and reset certain values.
Pressing the button for a long time turns off the instrument.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NTech Skywatch GEOS 11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NTech Skywatch GEOS 11 in the language / languages: English as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NTech Skywatch GEOS 11

NTech Skywatch GEOS 11 User Manual - Dutch - 19 pages

NTech Skywatch GEOS 11 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info