Manual NRX EVO 500EH (page 8 of 11) (English)

520224

Zoom out

Zoom in

1/11

? Call review

To review all the calls in the CLID call log, turn the

Jog Wheel.

? Deleting a call from the call history

It is possible to delete a call in the call log by turning

the Jog Wheel until the screen displays the

information you wish to delete. Press the DELETE

button once, the displayed call record will be deleted

and the next CLID information will be displayed on

the screen.

? Speed dialling from the Caller ID call log

Turn the Jog Wheel to scroll through the call log.

When the desired number is shown, press the

SPEAKER/HEADSET button or pick up the

handset. The telephone will dial the displayed call log

number.

2.7 Privacy (Mute)

Press the MUTE button to turn off the transmission

of the speech to the telephone line from the handset

microphone in handset mode or headset microphone

in headset mode or base microphone in speakerphone

Operation

mode. Press the MUTE button again to resume the

conversation with the calling party.

2.8 Redial/Auto Redial

To redial the last dialled number, pick up the handset

or press the SPEAKER/HEADSET button, then

press the REDIAL button. The telephone will

automatically redial the last number dialled.

Alternatively, press the REDIAL button while the

NRX EVO 500EH is off-line, the display will show

the last dialled number and its call duration. Pick up

the handset or press the SPEAKER/HEADSET

button, the telephone will automatically dial the last

number dialled.

To enter Auto Redial mode, press the Redial button

twice, the LED will light to confirm you have enter

Auto Redial mode. The phone will now keep

redialling the last dialled number (as setup in the

system menu) until the call is connected or the

maximum number of attempts is exceeded.

2.9 Pause

If the PAUSE button is pressed between numbers, a

“P” will show on the LCD to indicate a 2 second

pause in the dialling sequence.

Operation

2.10 Recall Facility

The NRX EVO 500EH has a Recall facility which is

used to access network/PBX services.

To use this facility pick up the handset or press the

SPEAKER/HEADSET button then press the

RECALL button.

See Telephone Set-Up for Recall types available and

set-up.

2.11 Dual Headset Facility

The NRX EVO 500EH comes fitted with two headset

ports. These are located on the left side of the cabinet

and allow a supervisor headset to also be connect to the

phone for training or monitoring purposes if required.

and allow a supervisor headset to also be connect to the

phone for training or monitoring purposes if required.

The ‘SPEAKER/ HEADSET’ button enables you to use

the telephone without lifting the handset. Connect a

headset and by simply pressing the ‘SPEAKER/

HEADSET’ button once, you will be connected to the

line. Pressing the ‘SPEAKER/HEADSET’ button

again will disconnect the telephone line and terminate

the call.

During a headset (handsfree) conversation, lifting the

handset will switch the unit to the handset mode. The

headset will be disabled and the handset should be

used for conversation instead. The headset mode will

be activated again by pressing the ‘SPEAKER/

HEADSET’ button and replacing the handset.

The NRX EVO 500EH is designed to work with a wide

variety of different headsets. The headset microphone

sensitivity can be adjusted via a rotary control located

on the base of the unit.

2.12 Speakerphone/On Hook Dialling

The 'SPEAKER/HEADSET' button allows the user to

operate the telephone without lifting the handset. Press

the 'SPEAKER/HEADSET’ button once, then operate

the telephone as normal. Communication with the

party at the other end of the telephone line is possible

using the built in Microphone and Speaker. It is

possible to switch from Handset to Speaker during a

call, by pressing the 'SPEAKER/HEADSET' button

then replacing the handset. The speakerphone

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of NRX EVO 500EH in the language / languages: English as an attachment in your email.

The manual is 0,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

NRX EVO 500EH Manual

Product: