741777
62
Zoom out
Zoom in
Previous page
1/66
Next page
– 62 –
Discolouration of the hob does not have any influence on the
operation or strength of the vitro-ceramic. It is not a form of
damage to the hob, but it is a result of residues that have not
been removed and have therefore burnt-in.
Shiny spots occur as a result of wear caused by the base of the
pans, in particular when using cooking pans with an aluminium
bottom or when using the wrong cleaning agents. These can
only be removed with great difficulty using common cleaning
agents. If necessary, repeat the cleaning several times.
Due to the use of aggressive cleaning agents and scratching
caused by the pan bases, the glass surface is rubbed off over
the course of time, leaving dark stains.
Do not use the cooking plate as a table top or
for putting utensils on.
Always lift up the pans/pots and do not slide them along the
glass plate.
9.2 Removing and replacing the extraction
tower and emptying the reservoir
If liquid has entered the intake opening, it will be
Collected in the fixed watertank (capacity of 150ml).
Remove the extraction tower from the lift system.
Clean/remove the contents in the fixed watertank
Replace the extraction tower in the lift system.
9.3 Cleaning the grease filters and the
ventilation tower glass
After 20 hours of cooking, the 4 LEDs on the hood touch control
will start to blink.
The grease filter is located in the extraction tower, the entire
tower can be cleaned in the dishwasher together with the
grease filter.
The grease filter can also be removed separately from the
extraction tower for cleaning, follow the steps below.
1 2 3
OF
The filter can be cleaned as follows:
In the dishwasher

INFO: Clean the grease filters using a standard
dishwashing programme at low temperature.
By hand: Immerse the filter in a mixture of boiling water and
grease-cutting dishwashing liquid. Use warm water to rinse the
filter under the tap, then leave it to dry.
Clean the extraction tower with a damp cloth with, if
necessary, a pH-neutral detergent

WARNING: If the instructions described above are
not followed, residue in the filter may cause a fire.
After cleaning:
Replace the filter in the extraction tower
Replace the tilting cover in the extraction tower.
Replace the extraction tower in the lift system.
Press the control key
for 3 seconds.
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Novy Up 40002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Novy Up 40002 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Novy Up 40002

Novy Up 40002 Installation Guide - English, German, Dutch, French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info