741777
57
Zoom out
Zoom in
Previous page
1/66
Next page
– 57 –
on the display. The symbol will disappear when the pan is
placed back onto the cooking surface. The cooking will then
continue at the same power level as selected previously.
Switch off the cooking zone after use. The pan detection
will
no longer be active.
5.1.4 Indication of residual heat
After the cooking zone or hob has been switched off completely,
the hob glass will still be warm, which can be seen by
H
. The
H
symbol disappears when the cooking zone glass can be
handled without danger.

WARNING: As long as the residual heat indication
remains active, the cooking zone(s) must not be
touched and no heat-sensitive items should be
placed on the cooking zone. Risk of fire and burns.
5.1.5 Power function and Super Power function
The Power function
P
increases the power rating of the selected
cooking zone. If this function is activated, these cooking zones
will be subjected to considerably higher power for 10 minutes.
The Power function is designed to quickly heat large quantities
of water, for pasta for example.
Switching Power on and off:
Switch on power
Display
Press the cooking zone selection button.
Press the [—] button and then the [+] button
until P
P
Switch off Power
9‐0
Press on the [—] button
Management of maximum power:
If this power limit is exceeded when switching to a high
selected cooking heat or switching the power function on, the
power management module reduces the cooking position of
the relevant cooking zone. This cooking zone will first flash,
and it is then automatically reduced to the maximum possible
cooking heat
The maximum individual power for each zone is 3700 W.
Cooking zone in cm
Power (W)
Front 24 x 20
Normal: 1600
Power: 1850
Back 24 x 20
Normal: 2100
Power: 3000
Power limit
Display
Selected cooking zone with Power function
P
Power limit activated
8
[9] reduced to [8] and flashes
5.1.6 Timer function
The timer function allows all cooking zones to be used
simultaneously for different periods of time (0 to 99 minutes).
Timer function
Setting or changing the cooking time
Display
Press the cooking zone selection button
.
Press [—] and [+] at the same time.
1‐P
Select the timer
00
Press [—] and [+] at the same time.
Reduce the time
30‐
29...
Press [—] on the timer
Increase the time
01‐
02...
Press [+] on the timer
A dot next to the indication of the power setting of the selected
zone lights up to activate the timer. The time is selected and the
countdown begins.
Switch off the timer function
Select the timer
Display
Press the cooking zone selection button
.
Press [—] and [+] at the same time.
Dot is on
Stop the timer
00
Keep pressing [—] on the timer until the timer
displays
00
,
or set the power of the cooking zone to
0
The timer can also be used as an independent cooking alarm
without selecting a cooking zone. If the hob is to be switched
off, the independent cooking timer will continue until the end of
the set time.
Using the timer without cooking:
Timer without cooking
Display
Switch on the hob. Press 2 sec. on
Select the timer
00
Press [—] and [+] simultaneously on the timer
Reduce the time
30‐
29...
Press [—] on the timer
Increase the time
01‐
02...
Press [+] on the timer
After a few seconds the LED no longer flashes [min]. The time
has been selected and the countdown has begun.
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Novy Up 40002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Novy Up 40002 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Novy Up 40002

Novy Up 40002 Installation Guide - English, German, Dutch, French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info