741776
7
Zoom out
Zoom in
Previous page
1/12
Next page
7
NL
4
Verwijder de beschermingsfolie op de bovenkant
van de sierdekplaat.
5
Druk centraal op de kantelklep van de afzuig toren
zodat deze naar boven beweegt.
6
Verwijder de beschermfolie rond de toren.
7
Plaats het toestel in de voorziene uitsparing. Plaats
deze dan met het frame op 10 mm van de rand
van de uitsparing.
Enkel 40 000
Plaats deze dan met het frame op 17 mm van de
rand van de uitsparing.
8
Plaats de meegeleverde bocht op de uitgang van
de afzuigkap.
9
Plaats de afzuigtoren mooi recht in de aanzuig-
opening van het toestel en druk deze naar beneden
via de kantelklep.
10
Enkel 40 006
Verwijder de sierdekplaat van de afzuigkap via
de 2 moeren aan de onderkant van deze plaat.
Bevestigd een extra laag meegeleverde tape (B)
aan de onderkant van de sierdekplaat.
Bevestig de sierdekplaat terug met gelijke speling
rondom de toren op de afzuigkap.
Los de 4 bouten iets aan de zijkant van de afzuigkap
en draai de stelschroef in totdat de toren gelijk
ligt met de sierdekplaat.
Zet de 4 bouten terug vast.
FR
4
Retirez la feuille de protection du haut de la plaque
de recouvrement décorative.
5
Appuyez au centre sur le clapet de la tour d‘extraction
pour qu’elle se déplace vers le haut.
6
Retirez le film de protection autour de la tour.
7
Posez l’appareil dans la découpe prévue. Puis
placez-le avec le cadre à droite à environ 10 mm
du bord de l’évidement.
Seulemen 40 000
Puis placez-le avec le cadre à droite à environ 17
mm du bord de l’évidement.
8
Placez le coude fourni sur la sortie de la hotte.
9
Placez la tour d’extraction bien droite dans l’ou-
verture d’aspiration de l’appareil et poussez-la
vers le bas.
10
Seulement 40 006
Retirez la plaque de recouvrement décorative de
l’appareil à l’aide des 2 écrous situés sur la face
inférieure de celle-ci.
Fixez une couche supplémentaire de ruban adhésif
fourni (B) sur sa face inférieure de recouvrement
décorative.
Fixez la à nouveau à l’appareil en respectant un
espace uniforme autour de la tour.
Desserrer légèrement les 4 boulons sur le côté
de l’appareil et serrer la vis de réglage jusqu’à ce
que la tour soit à fleur de la plaque.
Resserrez les 4 boulons.
DE
4
Entfernen Sie die Schutzfolie von der Oberseite
der dekorativen Abdeckplatte.
5
Drücken Sie mittig auf die Luftleitblech der
Absaugturm, damit dieser nach oben fährt.
6
Entfernen Sie die Schutzfolie um den Turm.
7
Stellen Sie das Gerät in die vorgesehene Ausspa-
rung. Dann mit dem Rahmen rechts ca. 10 mm
vom Rand der Aussparung entfernt platzieren.
Nur 40 000
Dann mit dem Rahmen rechts ca. 17 mm vom
Rand der Aussparung entfernt platzieren.
8
Legen Sie den mitgelieferten 90 Grad Bogen auf
den Auslass der Dunstabzugshaube.
9
Stellen Sie den Absaugturm schön gerade in
die Saugöffnung der Einheit absaugen und nach
unten drücken.
10
Nur 40 006
Entfernen Sie die dekorative Abdeckplatte mit
Hilfe der 2 Muttern an der Unterseite dieser Platte
vom Gerät.
Befestigen Sie eine zusätzliche Lage des
mitgelieferten Klebebandes (B) an der Unterseite
der Abdeckplatte.
Bringen Sie die Zierplatte mit gleichem Abstand
um den Turm herum wieder an der Einheit an.
Lösen Sie die 4 Schrauben an der Seite der Einheit
leicht und ziehen Sie die Einstellschraube an, bis
der Turm mit der Abdeckplatte bündig ist.
Bringen Sie die 4 Schrauben wieder an.
EN
4
Remove the protective foil from the top of the
decorative cover plate.
5
Press centrally on the extraction tower air valve
so that it moves upwards.
6
Remove the protective foil around the tower.
7
Place the unit in the opening provided. Place it
with the frame on the right at about 10 mm from
the edge of the recess.
Only 40 000
Place it with the frame on the right at about
17 mm from the edge of the recess.
8
Place the supplied bend on the outlet of the cooker
hood.
9
Place the extractor tower nicely straight into the
opening of the unit and push it downwards.
10
Only 40 006
Remove the decorative cover plate from the unit
using the 2 nuts on the underside of this plate.
Attach an extra layer of supplied tape (B) to the
underside of the decorative cover plate.
Attach the decorative plate back to the unit with
equal clearance around the tower.
Slightly loosen the 4 bolts on the side of the unit
and tighten the adjusting screw until the tower is
flush with the decorative plate.
Refit the 4 bolts.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Novy Up 40000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Novy Up 40000 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Novy Up 40000

Novy Up 40000 User Manual - English, German, Dutch, French - 66 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info