Manual Novy Cloud 230 (page 19 of 28) (English, German, Dutch, French)

741629

Zoom out

Zoom in

1/28

EN 19

Mood mode

The mood mode provides optimum lighting for creating a nice

atmosphere. This mode has by default a lower light intensity

than the cooking mode.

Switching mood mode on

Select control key .

The LED above the symbol lights up.

Conﬁrm mood mode

Brieﬂy press the control key .

For conﬁrmation, you can see the LED above the sym-

bol ﬂashing quickly for a short period.

The mood mode is then fully activated and the follo-

wing functions can be changed.

Switch mood mode on and off

Switching mood lighting fully on and off can be achie-

ved by brieﬂy pressing the or control key.

Mood mode light intensity

The brightness of the lights in mood mode can be in-

creased or decreased using the and buttons; by

holding these down, the brightness will change.

Change the colour temperature in the mood mode

The colour temperature can be adjusted from cool to

warm using the or control keys. Holding the keys

down will adjust the colour temperature. Release when

the desired colour temperature has been reached.

After having switched off the mood mode, the last set

value will always be remembered. This means your pre-

ference will be used every time the hood is switched

on.

3.4 Remote control

The remote control for hood is preinstalled and ready

for use.

Indien de ingestelde code stoort met ande-

re zenders, kan er een andere code op de afstands-

bediening gekozen worden. Er zijn totaal 10 code mo-

gelijkheden.

Change the code of the remote control

• First switch off the power supply of the hood. Do this

by deactivating and reactivating the on/off switch.

The set-up mode will now be active for 3 minutes.

The new code must be set up within these 3 minu-

tes.

• To change the code, you must click the cover loose

with a screwdriver.

• Brieﬂy press on the small button with a paper clip.

The 3 lights on the remote will ﬂash the same amount

of times as the pre-set code.

• If a different code is required, press the small button

for 3 seconds (the 3 lights will light up for 7 sec).

Now brieﬂy press the small button again within 7 se-

conds to change the code. (1x ﬂash is code 1, 2x

ﬂash is code 2, etc. There are 10 codes).

• Ensure the power supply is reconnected to the ex-

traction hood.

• Within 1 minute, press the ON/OFF button on the

remote control.

Change the batteries

• For changing the batteries unscrew the plastic co-

ver, remove the old batteries and insert the new

ones. Pay attention to the polarity marking given in

the battery compartment.

• Empty batteries are not to be disposed of in the

household refuse, but they are to be handed in as

chemical waste.

Technical information:

- Power supply: (1xCR2450) batteries

- Frequence: 433.92Mhz

- Numbre of codes: 10

- Worktemperature: 0-50°C

- Dimensions: 125,6 x 46,6 x 11,2 mm

3.4 InTouch

The cooker hood features the InTouch function. If you

have a Novy induction plate with InTouch, you can ope-

rate the hood from the plate.

Programming InTouch on the induction plate

The remote control must ﬁrst work with the hood. If ne-

cessary, the remote control code can be changed, as

described in Section 3.3.

Connect the plate to the mains supply.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Novy Cloud 230 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Novy Cloud 230 Manual

Product: