741744
15
Zoom out
Zoom in
Previous page
1/26
Next page
15
NL 3 INSTALLATIE
1
Maak de uitsparing voor de afzuigkap:
Afmetingen voor type 810/811/816: 545 x 286mm
Afmetingen voor type 820/821/826: 845 x 286mm
Voor de montage van de inbouwunit dient er een
uitsparing gemaakt te worden in de montageplaat.
Het is aan te bevelen de uitsparing waterdicht
af te werken.
De inbouwunit dient gemonteerd te worden met
de bediening aan de rechterzijde van de gebruiker,
zodat de onderplaat van u af scharniert en het
filter eenvoudig uit de afzuigkap genomen kan
worden.
2
Standaard is de uitblaasrichting van de motor naar
rechts. Indien gewenst kan de uitblaasrichting
gewijzigd worden.
Installatie met uitblaasrichting naar rechts
Installatie met uitblaasrichting naar boven
Installatie met uitblaasrichting naar links
Installatie met uitblaasrichting naar voor/
achter
zie volgende pagina's
DU 3 INSTALLATION
1
Stellen Sie einen Ausschnitt her:
Typ 810/811/816 – Ausschnitt 545 mm x 286 mm.
T
yp 820/821/826 – Ausschnitt 845 mm x 286 mm.
Für die Installation der eingebauten Einheit muss
ein Ausschnitt in der Montageplatte hergestellt
werden. Es wird empfohlen, den Ausschnitt
wasserdicht auszuführen.
Die eingebaute Einheit sollte mit der Steuerung
auf der rechten Seite des Anwenders montiert
werden, sodass die Grundplatte sich von Ihnen
weg öffnet und der Filter problemlos aus der
Dunstabzugshaube entfernt werden kann.
2
Die Abluftöffnung des Motors befindet sich
standardmäßig rechts. Falls erforderlich, kann
sie modifiziert werden.
Installation mit Abluftöffnung rechts
Installation mit Abluftöffnung aufwärts
Installation mit Abluftöffnung links
Installation mit Abluftöffnung vorne/hinten
Siehe nächste Seiten
FR 3 INSTALLATION
1
Dimensions de la découpe d’encastrement:
Type 810/811/816–Découpe 545mmx286mm.
Type 820/821/826–Découpe 845mmx286mm.
Pour l'installation de l'unité encastrée, il convient de
faire une découpe d'encastrement dans la plaque
de montage. Il est recommandé d'étanchéifier
l'ouverture de la découpe.
L'unité encastrée doit être montée avec la
commande sur le côté droit de l'utilisateur, de
sorte que la plaque inférieure s'ouvre loin de
vous et que le filtre puisse être facilement retiré
de la hotte aspirante.
2
Par défaut, l'ouverture d'évacuation du moteur se
trouve à droite. Si nécessaire, cette configuration
peut être modifiée.
Installation avec ouverture d'évacuation vers
la droite
Installation avec ouverture d'évacuation vers
le haut
Installation avec ouverture d'évacuation vers
la gauche
Installation avec ouverture d'évacuation vers
l'avant/l'arrièr
e
Voir les pages suivantes
EN 3 INSTALLATION
1
Make a build-in opening:
T
ype 810/811/816– Cut-away 545mm x 286mm.
Type 820/821/826 – Cut-away 845mm x 286mm.
For the installation of the built-in unit there is
a cut-out opening to be made in the mounting
plate. It is recommended to finish the cut-out
opening watertight.
The built-in unit should be mounted with the
control on the right side of the user, so that the
bottom plate opens away from you and the filter
can be easily removed from the extractor hood.
2
As standard, the exhaust opening of the motor
is to right. If required, the exhaust opening can
be be modified.
Installation with exhaust opening to the right
Installation with exhaust opening upwards
Installation with exhaust opening to the left
Installation with exhaust opening to front/rear
See next pages
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Novy 826 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Novy 826 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Novy 826

Novy 826 User Manual - English, German, Dutch, French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info