741744
39
Zoom out
Zoom in
Previous page
1/44
Next page
– 39 –
Replacing the grease fi lters
Before replacing the grease fi lter, clean the edges of the
part in the extractor hood in which the fi lter isplaced.
Grasp the fi lter with 2 hands.
Make sure that the lock or the lip on the fi lter is on the
bottom side.
Insert the back of the fi lter in the opening, press the fi lter
upwards at the front and make sure it clicks tight.
You can obtain a new grease fi lter from adealer
or the Novy website. Article number grease
lter: 810/811/816: 609.014
820/821/826: 7400.020
3.3 Monoblock recircuilatiefi lter (optioneel)
When selecting recirculation, always set the recirculation
programme on the extractor hood (see paragraph 2.4)
If recirculation is chosen the appliance is connected toan
outlet box with a monobloc recirculation fi lter, oramonob-
loc recirculation fi lter is fi tted in the extractor hood behind
the grease fi lter.
Replacement indicator monobloc recirculation fi lter
Indication: red indicator light stays on
After a set time a red indicator light on the appliance shows
that the monobloc fi lter must be replaced.
Reset the cleaning indicator
After replacing the monblock fi lter(s), carry out
the following action. The motor of the cooker
hood must be running. Simultaneously press
2
and
3
for 3 seconds until the red indicator led
ashes 3 times for confi rmation. If the cooker
hood is not reset, it will automatically reset
after the motor of the cooker hood has been
switched on 10 times.
Installing the monoblock fi lter
Refer to your recirculation kit manual for removal and
installation of the monoblock fi lter.
You can obtain a new monobloc fi lter from
adealer or the Novy website.
3.4 Led lighting
Replacing the led lighting
First, remove the power supply from the hood and allow
the lighting to cool down suffi ciently.
1. Carefully slide the spotlight holder dow; next, open up
the spotlight holder by means of a tilting movement.
2. Removing the LED lamp:
A. First disconnect the cable to the LED to be replaced.
Disconnect by means of releasing the lock, by applying
light pressure while at the same time pulling away.
B. Next, remove the LED to be replaced by making a gentle
rotating movement to the left.
3. Mounting the new LED:
A. Place the new LED light into the locking ring.
B. Make a rotating movement to the right until the LED
light is locked.
C. Connect the power cable.
D. Place the spotlight holder back in the cooker hood and
reconnect the power.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Novy 826 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Novy 826 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Novy 826

Novy 826 Installation Guide - English, German, Dutch, French - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info