478311
17
Zoom out
Zoom in
Previous page
1/24
Next page
17
Electrical connection
Electrical output: electrical cord + plug with
ground. To be plugged into socket with ground.
Check for compatibility with information on type
plate (behind filter). Socket must be within reach.
Changes or replacement of the electrical cord
should be performed by a professional only.
Attention ! 2 different ways of connecting
1st Possibility
Mounting with air evacuation to the back (without
chimney) (Fig . 2).
The socket is placed above the hood
The plug must be plugged into the sockets
(not really recommended – socket is visible)
2nd Possibility
Mounting with air evacuation to the back (without
chimney) (Fig . 3).
Electrical supply wire comes through the wall
opening for the air evacuation.
There is a clip mounted on the hood:
• cut the plug from the wire and connect it with
the clip
• connect the electrical supply wire with the clip
also
The socket is not visible
For the 3rd possibility it is necessary to fore-
see a complete interruption possibility in the
wiring.
The possibility must exist to cut the tension on
the hood for maintenance reasons.
Dimensions: p. 18
Electrical scheme: p. 19
Replacing the lamps
Please allow the lights to cool down sufficiently
before touching them. Cover and protect delicate
surfaces underneath the hood when changing
lamps.
To have access to the lamps you need to open
the plate. Remove the screws at the left and right
side of the lighting device (fig.1). Close the plate.
Open the lighting device (fig. 2) and replace the
lamps (fig. 3) Attention! Don’t touch new lamps
with bare hands.
The hood has for 4 halogen lamps of 25W of the
following type OSRAM 64429 ES/12V/GY 6,35
(order number 7800-29)
(Fig 1)
(Fig 2)
(Fig 3)
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Novy 7809 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Novy 7809 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info