741768
19
Zoom out
Zoom in
Previous page
1/26
Next page
EN 19
3.3 Remote control
The remote control for hood is preinstalled and ready
for use.
If the power is disconnected from the unit and
switched on again, wait 3 minutes before using
the remote control. This prevents the code from
being changed so that the unit does not respond
to the remote control or so that another unit is not
connected to the remote control.
If the set code disrupts other transmitters, another
code can be selected using the remote control.
There are 10 different codes in total.
Change the code
First switch off the power supply of the hood. Do this
by deactivating and reactivating the on/off switch.
The set-up mode will now be active for 3 minutes.
The new code must be set up within these 3 min-
utes.
Simultaneously press
and . The lamp on the re-
mote control flashes as many times as the selected
code. Repeat this step until you have reached the
required code (there are 10 code options in total).
Press the key
on the remote control within 10 sec-
onds to confirm the settings. The cookerhood and
the remote control are now in line with each other.
Change the batteries
For changing the batteries unscrew the plastic cov-
er, remove the old batteries and insert the new ones.
Pay attention to the polarity marking given in the
battery compartment (figure 4).
Empty batteries are not to be disposed of in the
household refuse, but they are to be handed in as
chemical waste.
Technical information:
- Power supply: (2xAAA) batteries
- Frequence: 433.92Mhz
- Numbre of codes: 10
- Worktemperature: 0-50°C
- Dimensions: 110 x 50 x 19mm
3.4 InTouch
The cooker hood features the InTouch function. If you
have a Novy induction plate with InTouch, you can
operate the hood from the plate. Programming InTouch
on the induction plate.
Programming InTouch on the induction plate
The remote control must first work with the hood. If ne-
cessary, the remote control code can be changed, as
described in Section 3.3.
Connect the plate to the mains supply.
1. Press buttons and on the induction hob simul-
taneously for 10 seconds until you hear 5 consecu-
tive bleeps.
The hob will now search for the hood code auto-
matically.
WAIT until the hood lights flash, OR until you hear
a clicking sound eight times from the hood. (Be
patient, this may take a while)
2. Then touch any InTouch key, or or or on
the induction plate until you hear a beep signal. This
is the confirmation of the pairing of both devices.
Now you can operate the hood with the keys on the
induction plate.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Novy 7550 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Novy 7550 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info