478304
16
Zoom out
Zoom in
Previous page
1/28
Next page
EN 16
Maintenance
Maintenance of the grease filter
The hood contains one or 2 metal filters (according
to the model) which should be cleaned twice a
month.
Access to the filter
Take hold of the right and left side of the plate (a)
an pull down simultaneously. Remove the filter (b)
by taking hold of its hook and by pulling it down.
Cleaning the filter:
• in the dishwasher
• manually: in a hot solution of water and a
liquid detergent. Rince and allow to dry com-
pletely
Important! The previous instructions need to
be followed. If not an increased fire hazard may
occur.
Maintenance of the hood
Please allow the lights to cool down sufficiently
before cleaning the hood. Use a soft, wet cloth
and a mild detergent to clean the hood. Never
use aggressive, abrasive detergents or sponges.
Bleach will damage stainless steel.
The stainless steel surfaces can be treated with
Novy Inoxcleaner (906.060) after cleaning.
Replacing the lamps
Please allow the lights to cool down sufficiently
before touching them. Cover and protect delicate
surfaces underneath the hood when changing
lamps. The hood needs to be disconnected from
the current before proceeding.
A. For models with economic lamps
Access to lamps:
• glass plates are attached with clips
• pull down on plates to release from clips
• the lamps can easily be removed from the
socket
• replace lamps
• replace glass plates
The hood has 2 lamps of the following type:
DULUX-L (TC-L) 2G11 / 36 W / color type 830.
Total energy consumption with lightning:
7400, 7210: 240 W
7410, 7220, 7300: 370 W
7405, 7215, 7415, 7225, 7305:
• with 345999: 370 W
• with 445999: 300 W
B. For models with halogen spots
On both sides of the hood 2 halogen lamps are
mounted in a holder. To remove the lamps the
holder needs to be opened.
Opening of the light holder:
• open the plate carefully with both hands
• 2 screws on the holder are visible. Remove
these 2 screws.
• gently slide the holder in the direction of the
filter.
Replace the lamps:
• pull the black socket (with wires) away from
the lamp
• the lamp is held in place by clips, press clips
towards each other and remove from holding
space
• the lamp can now be removed, and a new
lamp can be installed
• install the clips back in their original space
• place socket on lamp
• Place the holder back in his position::
• put holder carefully back in place
• fasten with screws
• close plate
The hood has 4 lamps of the following type:
12V/20W/Ø35/GU4/38°.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Novy 7406 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Novy 7406 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info