624809

Novy 1811 ONE Manual

43
Zoom out
Zoom in
Previous page
1/52
Next page
EN 43
6.2 Remove the ventilation tower and empty the re-
servoir
Water entering the suction opening is collected in a re-
movable reservoir (volume 150 ml).
• Press the [ symbol ] key to make the tower move up.
• Hold the tower with two hands on both sides. Do not
pull up the tower only by the glass.
The four white LEDs start flashing as soon as the tower
is removed from the cooking plate. Do not place the
tower on the cooking plate. You can see the remov-
able reservoir through the opening. Take out the wa-
ter reservoir and empty it. When this reservoir is full,
it will run over in the overflow reservoir (200 ml). This
can be dried with a cloth. When the overflow reservoir
has become full as well, the excess water will end up
in a container (100 ml). This can be dried with a cloth.
You can also open a slide at the bottom of the unit to
remove the water.
6.3 Cleaning the grease filters
After 20 cooking hours, white led next to the symbol
starts burning. Remove the suction tower from the
cooking plate as described in section 6.2.
Turn the glass a quarter of a turn to the right to be able
to remove the glass from the tower. You will see the two
metal fat filters inside the tower right away.
Cleaning the filter
• in the dishwasher
• manually: in a hot solution of water and a liquid de-
tergent. Rince and allow to dry completely.
The previous instructions need to be followed. If
not an increased fire hazard may occur.
After cleaning:
• Place the filters and the glass back onto the tower.
• Place the tower back into the opening.
• Press the [ ] key for three seconds.
6.4 Place back the ventilation tower
Place back the removable water reservoir and the ven-
tilation tower at their respective places in the centre
of the cooking plate. A magnet keeps the ventilation
tower nicely at its place. Now press the key to move the
tower down and initialise it.
6.5 Regenerate the monoblock filter (in case of re-
circulation)
The white indicator lamp starts burning after 200 work-
ing hours (time to regenerate the monoblock filter).
If recirculation has been selected, the unit has been
connected to an exhaust box with a Monoblock recir-
culation filter.
Regenerate the monoblock filter
• The Monoblock can be regenerated up to 12 times.
This is done in the oven.
• Place the filter in the oven for 1 hour at 120°C. Pro-
vide sufficient fresh air in the room where the oven
has been placed, as smells can be released. Smells
can be released when baking certain kinds of fish.
In this case it is best to immediately regenerate the
filter in the oven.
Reset the monoblock indication
• Put the monoblock filter back in the exhaust box.
• Press the
key for three seconds.
7 WHAT TO DO IN CASE OF A PROBLEM
7.1 Indications if the cooking plate
The hob or the cooking zone doesn’t start-up:
• The hob is badly connected on the electrical net-
work.
• The protection fuse cut-off.
• The looking function is activated.
• The sensitive keys are covered of grease or water.
• An object is put on a key.
The control panel displays [ U ]:
• There is no pan on the cooking zone.
• The pan is not compatible with induction.
• The bottom diameter of the pan is too small.
The control panel displays [ E ]:
• The electronic system is defective.
• Disconnect and replug the hob.
• Call after sales
One or all cooking zone cut-off:
• The safety system functioned.
• You forgot to cut-off the cooking zone for a long
time.
• One or more sensitive keys are covered.
• The pan is empty and its bottom overheated.
• The hob also has an automatic reduction of Booster
level and breaking Automatic overheating.
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Novy 1811 ONE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Novy 1811 ONE in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Novy 1811 ONE

Novy 1811 ONE Installation Guide - English, German, Dutch, French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info