741785
23
Zoom out
Zoom in
Previous page
1/76
Next page
23
INSTALLATION INSTRUCTIONS
The installation comes under the exclusive responsibility of specialists.
The installer is held to respect the legislation and the standards enforce in his home country.
How to stick the gasket:
The gasket supplied with the hob avoids all infiltration of liquids in the cabinet.
His installation has to be done carefully, in conformity of the following drawing.
Warning: Do not apply sealant between the bottom side of the hob and worktop
Fitting - installing:
The cut out sizes are:
Type Cut size Glass size Cut size of flush mouting
Width
Depth Width Depth Thickness
Width Depth Radius
1773
/2
560
490
654 524 7 650 520 4
1775
/2
750
490
804 524 7 800 520 4
1776
/2
750
490
804 524 7 800 520 4
1777
/2
890
390
914 414 7 910 410 4
1778
/3
850
490
904 524 7 900 520 4
Ensure that there is a distance of 50 mm between the hob and the wall or sides.
The hobs are classified as “Y” class for heat protection. Ideally the hob should be installed
with plenty of space on either side. There may be a wall at the rear and tall units or a wall
at one side. On the other side, however, no unit or divider must stand higher than the
hob.
The piece of furniture or the support in which the
hob is to be fitted, as well as the edges of
furniture, the laminate coatings and the glue used
to fix them, must be able to resist temperatures of
up to 100 °C.
The mural rods of edge must be heat-resisting.
Not to install the hob to the top of a not ventilated
oven or a dishwasher.
To guarantee under the bottom of the hob casing
a space of 20 mm to ensure a good air
circulation of the electronic device.
If a drawer is placed under the work, avoid to put
into this drawer flammable objects (for
example: sprays) or not heat-resistant objects.
Provide a ventilation opening from 4 mm just
under the worktop over a width of min. 600 mm for sufficient cooling of the hob.
Stick the gasket (2) two
millimeters from the external
edge of the glass, after removing
the protection sheet (3).
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Novy 1777-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Novy 1777-2 in the language / languages: English, Italian, Spanish as an attachment in your email.

The manual is 2,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info