Manual Novoferm Novomatic 563S (page 50 of 144) (English, German, Dutch, French, Spanish)

709107

Zoom out

Zoom in

1/144

50 N-563 S

Diagnostic display

Number State Diagnosis / Remedy

The operator starts. In normal operation, drive receives start signal via START input or

by drive unit.

Garage door has reached end

position OPEN.

Garage door has reached end

position CLOSE.

End position has not been

reached.

The display shows a “0” during

the next opening and closing

cycle and then goes out.

The operator is carrying out a learning cycle for the force limit.

Caution: During this travel cycle the operator does not monitor the

force. Make sure that no persons or objects are in the travel path

of the garage door.

The display continues to show a

“0”.

The force-learning cycle did not complete and must be repeated.

The door’s end-of-travel position may have too much pressure.

Set the door’s pressure to the correct level.

The door does not open or close. Interruption at STOP A or activation of an external safety device

(such as a pass-door).

The door does not close. Interruption at STOP B or activation of an external safety device

(such as a photoelectric sensor).

The door setting and learning

cycle did not complete correctly.

You must use menu stages 3 and 4 to complete the door settings

correctly and then complete the force-learning cycle.

There is a permanent impulse

signal at the start input.

Start signal is not detected or pulse duration (eg button jammed).

An error occurred in setting the

operator.

The travel path is too long.

Repeat setting procedure with menu stages 3 and 4.

Error in learning cycle. Repeat position learning cycle with menu stages 3 and 4.

Reduce force when approaching the end-of travel positions.

The door does not open or close. An error occurred during the self-test. Disconnect the power

supply.

Motor standstill. The motor does not rotate. Call a specialist company to repair the

motor.

Electronic brake activated. The

garage light remains on.

The operator is pulled from upper end position. Check the door

and the springs. Setting upper end lower.

The vacation lock is activated.

The door does not open.

The side switch for SafeControl/Signal 112 is active. A reset is

required.

Wicket door contact test failed. Check the cables and clamping connections of the wicket door

contact.

My remote control is not working changed the battery but I’ve had to go back to manual .
Do I need to reset it and if so how do I do it Submitted on 25-8-2023 at 14:05
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Novoferm Novomatic 563S in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 6,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Novoferm Novomatic 563S Manual

Product: