Manual Novoferm Novomatic 563S (page 43 of 144) (English, German, Dutch, French, Spanish)

709107

Zoom out

Zoom in

1/144

Installation

N-563 S

Checking force limit

1. Place an force gauge or obstruction (e.g. the operator’s cardboard box) in

the closing area of the door.

2. Close the garage door. The garage door moves to the end position

CLOSE. When the garage door reaches the obstruction, the garage door

must stop and then move back to the end position OPEN.

3. If the door can lift persons (e.g. openings greater than 50 mm or treads),

the force limiting unit must be checked in the opening direction: For

additional load of the door with 20 kg of mass, the drive has to stop.

Delete force learning cycle

Note: The force learning cycle always starts from the end position CLOSE.

The force learning cycle must be repeated after each replacement of the

garage door springs:

Proceed to Menu 5 (see special settings) and keep the programming button

(PROG button) (D) pressed for 3 seconds. The display shows “0”.

Complete the process as described in the force learning cycle section on

page 42.

For your safety, we recommend that the door system be checked before initial use and as needed -

but at least once a month - by a specialist. We recommend consulting a specialist company.

Special settings

Open the special settings menu

1. Keep the programming button (PROG button) (D) pressed in for approximately 3 seconds. The display shows

“3”.

2. Press the programming button (PROG button) (D) again. The display shows “4”.

3. Keep the programming button (PROG button) (D) pressed in again for approximately 3 seconds. The display

shows “5”.

My remote control is not working changed the battery but I’ve had to go back to manual .
Do I need to reset it and if so how do I do it Submitted on 25-8-2023 at 14:05
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Novoferm Novomatic 563S in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 6,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Novoferm Novomatic 563S Manual

Product: