Manual Novoferm Novomatic 423 (page 42 of 144) (English, German, Dutch, French, Spanish)

709101

Zoom out

Zoom in

1/144

42 N-423

Installation

Menu 2:

Programming the 4-minute light

1. Briey press the programming button (PROG button) (D) twice.

The display shows “2”.

2. Press the button on the hand-held transmitter to control the light until the

digital point (A1) ashes 4 x.

3. As soon as the light goes out, you can set the next hand transmitter (see

Step 1).

Note: Programming the ventilation position and partial opening:

see menu 9.

Note: Up to 30 codes can be learned.

(Example 15x start 15x light).

Delete all radio codes

1. Pull the main plug

2. Push and hold the oval PROG-Button (D).

3. Connect the mains plug to the mains socket and keep the PROG button

(D) pressed until the digital point ashes quickly.

Menu 3 + Menu 4:

Setting the end positions

1. Keep the programming button (PROG button) (D) pressed in for

approximately 3 seconds. The display shows “3”.

2. Press the OPEN button (B) and check if the garage door moves to the

OPEN position.

3. If the garage door moves in the wrong direction, keep the programming

button (PROG button) (D) pressed in for approximately 5 seconds until a

chaser light appears.

4. Keep the OPEN button pressed until the garage door is at the desired

end position OPEN. If needed, press the CLOSE button (C) to adjust the

position.

5. Once the garage door is at the desired OPEN position, press the

programming button (PROG button) (D). The display shows “4”.

6. Press the CLOSE button (C) as soon as the display ashes.

7. Keep the CLOSE button pressed until the garage door is at the desired

end position CLOSE. If needed, press the OPEN button (A) to adjust the

position.

8. Once the garage door is at the desired end position CLOSE, press the

programming button (PROG button) (D). The display shows “0”.

9. Continue with the force learning cycle.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Novoferm Novomatic 423 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 13,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Novoferm Novomatic 423 Manual

Product: