709023
45
Zoom out
Zoom in
Previous page
1/52
Next page
45
Cleaning and Maintenance
Hygiene programme
This washing machine is equipped with a hygiene
display and a hygiene programme.
This programme allows you to execute a hygiene
cleaning process of the machine. This is recommended
in particular if a fellow occupant has washed at a tem-
perature of less than 60°C before you. The machine will
indicate this displaying «70°C hygiene programme»
whenever you select a programme under 60°C.
In this case start your laundry day with a 60°C or 95°C
wash programme or select the hygiene programme.
Note
If you want to do without additional hygiene measures,
you can also start your selected programme directly using
the start button.
Starting the hygiene programme
«Coloureds 60°C» + «Start»
The hygiene programme is started by holding down the
button «Coloureds 60°C» and pressing the Start button.
Do not use the hygiene programme with laundry and
detergent!
Cleaning the machine
Ensure that the power supply is switched off before any
cleaning, care or maintenance work.
Under no circumstances spray the machine with water
or clean it with a steam cleaner.
Do not use solvents! These substances can damage
parts of the machine, produce poisonous vapour and
carry the risk of explosion.
Casings and control areas should only be cleaned with
soap
or a commercially available, solvent-free, non-abra-
sive cleaning product.
The side walls of machines with a chrome steel nish
should not be cleaned with chrome steel cleaner under
any circumstances.
Descaling the machine
If the correct amounts of detergent are used, descaling
is no longer necessary in general.
Descalers contain acids, can attack parts of the machine
and cause discolouration of laundry.
If you do, however, wish to descale the machine, follow
the manufacturer›s instructions on the packet.
Limescale formation depends largely on the hardness of
the water. To avoid water damage, we recommend
having this checked by a specialist after around 5 years
of fault-free operation.
Cleaning the drum
Rust marks caused by metal parts standing still for
lengthy periods can be removed with a chlorine-free
cleaning product (look at the description of the ingre-
dients on the pack).
Never use steel wool!
Water supply hose
Only for machines without water stop. To avoid water
damage, we recommend having this checked by a
specia list after around 5 years of fault-free operation.
Frost protection
If the machine is in a room susceptible to frost, all residual
water must be removed from the detergent pump and
water supply and drain hoses immediately after use.
Emptying the drain pump
See chapter «Emergency emptying».
Emptying the water supply hose
Turn off the water supply
Screw off the hose at the tap, let the water run into a
bowl.
Screw the hose back onto the tap.
Cleaning the detergent drawer
1. Pull the detergent drawer out until it stops.
2. Press down in the middle of the softener section cover,
and pull the drawer all the way out.
3. Remove the divider.
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Novamatic WA6780 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Novamatic WA6780 in the language / languages: English, German as an attachment in your email.

The manual is 1,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Novamatic WA6780

Novamatic WA6780 User Manual - French, Italian - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info