Manual Novamatic TK 606 Z (page 33 of 46) (English, German)

709017

Zoom out

Zoom in

1/46

When the programme

has finished the pilot

lights “Ende” is on.

Start/Pause

Press this button to

start the dryer after

having selected the

programme and the

options. The relevant

light will stop flashing.

If the programme

selector dial is turned

to another position,

when the machine is

running, the buzzer

will sound and the

programme phase

indicator lights will

flash. The drum turns

alternately in both

directions during dry-

ing.

All drying pro-

grammes end with a

10 minute cooling

phase (light Cooling is

on). You may remove

the laundry after this

phase.

If the door of the

appliance or the small

door at the bottom is

opened while the pro-

gramme is running,

this button must be

pressed again after

closing the door in

order to restart the

programme from the

point at which it was

interrupted. This but-

ton must be

depressed also after a

power failure and

after having reinserted

the water reservoir, if

it has been emptied in

the middle of a pro-

gramme after lighting

up of light “Behälter”.

In both cases the light

of the Start/Pause

button flashes to

remind you that the

start button needs to

be pressed again.

Indicator lights

These lights indicate

the following func-

tions:

• “Trocknen” -

drying light

This light indicates

that the appliance

is in the drying

phase.

• “Ende” - end of

programme light

This light is on at

the end of the

cooling phase,

during the anti-

creasing phase

and at the end of

the programme.

• “Behälter” -

water reservoir

full light

This light indicates

that the appliance

is in the drying

phase.

This light comes

on at the end of

the programme to

remind you that

the water reser-

voir must be emp-

tied out. If this

light illuminates

during a pro-

gramme this

means that the

water reservoir is

full. The buzzer

sounds, the pro-

gramme stops,

the light of the

Start/Pause but-

ton flashes. This

light comes on

also when the

water reservoir is

not inserted cor-

rectly.

• “Siebe” - filter

cleaning

This light illumi-

nates at the end

of the programme

to remind you that

the filters must be

cleaned.

• Condenser

cleaning

It comes on every

80 cycles to

remind you that

the condenser

must be cleaned.

Cancelling a

programme

Turn the selector dial

to “Aus” to cancel a

programme which is

running. Now you can

select a new pro-

gramme.

At the end of the

programme

If the laundry is not

removed at the end of

the cycle, the dryer

performs an anti-

creasing phase (dura-

tion: 30 minutes maxi-

mum).

Lights “Ende”, and

“Behälter” remain lit

and the buzzer

sounds for 2 minutes.

Turn the programme

selector dial to “Aus”

to switch the machine

off. Remove the laun-

dry from the drum and

carefully check that

the drum is empty.

If you do not intend to

carry out another

wash, close the water

tap. Leave the door

open to prevent the

formation of mildew

and unpleasant

smells.

Turn the programme

selector dial to “Aus”;

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Novamatic TK 606 Z in the language / languages: English, German as an attachment in your email.

The manual is 1,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Novamatic TK 606 Z Manual

Product: