Manual Novamatic EKI2610 (page 35 of 40) (English, German, French, Italian)

708943

Zoom out

Zoom in

1/40

■ Make sure that the doors are closed fully

and correctly. The door seal must be

flush against the frame of the fridge.

■ Leave warm or even hot items to cool

down outside the unit.

■ The storage of moisture-releasing food-

stuffs leads to increased build-up of ice

on the rear of the fridge and a reduction

in cooling power.

Tips

The following points should be noted

when using the new appliance:

■ A appliance which has just been put into

use needs approx. 15 hours (with pro-

ducts) until it has reached its normal

operating temperatures.

■ If the doors are open for longer than 2

minutes then the lamp starts to flash.

Make sure after closing that the doors

are fully sealed. The self-closing hinges

assist this.

■ The cooling time for beverages and other

products can take up to 6 hours from

room temperature down to the

cold

room temperature. The warmer they are

when put in, the longer this time will be.

■ Re-setting the temperature control has

no effect on the cooling rate, only on

the temperature reached.

■ Condensation can form on the glass

shelves if products are stored which emit

water vapour.

■ The electronic control defrosts the cold

room only about once per day. A cat ice

may be visible oftentimes at the back

board of

the cold room – this is though

normal.

Cleaning

The appliance is to be kept clean for the

hygienic storage of foodstuffs. It should be

washed out from time to time with a mild

soapy solution and then dried. An occasio-

nal wiping with a vinegar solution suppres-

ses odours and is recommended. Keeping

the door seals clean stops them from

sticking and thus avoids them being dama-

ged.

No scouring cleaners or

scratching cloths

are to be used. Clean the door seals with a

soft brush. If the appliance has not been

used for some time, turn off by using the

main switch (3 sec.). Empty the appliance,

defrost it, clean, and then leave the cold

room as well as the freezer compartment

open.

– For cleaning the control element please

use only a humid flannel.

– Be careful that as little cleaning water as

possible goes thoug

h the drainage

channel into the collection dish.

– Before being put back in use, the appli-

ance and the seals of the cold room and

the freezer must all be completely dry.

Informations for energy-saving use

■ As far as possible, use the cooling unit in

its as-delivered state. The arrangement

of drawers, shelves and trays ensures the

best possible temperature distribution.

■ Do not install the unit near radiators,

radiator pipes or smoke extractors and

protect it as far as possible from direct

sunlight

■ Make sure the unit doors are kept open

for as short a time as possible. The

quicker the doors are closed again, the

less cold is lost.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Novamatic EKI2610 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 0,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Novamatic EKI2610 Manual

Product: