3. The alarm buzzer may sound after a
few seconds.
To reset the alarm refer to "Door open
alarm".
If “DEMO” appears on the Display, the
appliance is in demonstration mode: re-
fer to “Troubleshooting” paragraph.
4.
The temperature indicators show the
set default temperature.
To select a different set temperature refer to
"Temperature regulation".
Switching off
To switch off the appliance do these steps:
1.
Press the ON/OFF button for 5 sec-
onds.
2.
The display switches off.
3.
To disconnect the appliance from the
power disconnect the mains plug from
the power socket.
Temperature regulation
The set temperature of the fridge may be
adjusted by pressing the temperature but-
ton.
Set default temperature: +5°C for the
fridge.
The temperature indicator shows the set
temperature.
The set temperature will be reached within
24 hours.
Important! After a power failure the set
temperature remains stored.
Drinks Chill function
The Drinks Chill function is to be used to
set an acoustic alarm at the preferred time,
useful for example when you want to rapidly
chill a bottle of wine for a certain length of
time.
To switch on the function:
1.
Press the Functions button until the
corresponding icon appears.
The Drinks Chill indicator flashes.
The Timer shows the set value (30 mi-
nutes) for a few seconds.
2.
Press the Temperature colder or Tem-
perature warmer button to change the
Timer set value from 1 to 90 minutes.
3.
Press the OK button to confirm.
The Drinks Chill indicator is shown.
The Timer start to flash (min).
At the end of the countdown the Drinks
Chill indicator flashes and an audible alarm
sounds:
1.
press OK button to switch off the
sound and terminate the function.
It is possible to deactivate the function at
any time during the countdown:
1.
Press the Functions button until the
Drinks Chill indicator flashes.
2. Press the OK button to confirm.
3. The Drinks Chill indicator goes off.
It is possible to change the time at any time
during the countdown and at the end by
pressing the Temperature colder button
and the Temperature warmer button.
Child Lock function
To lock the buttons from unintentional oper-
ation select the Child Lock function.
To switch on the function:
1.
Press the Functions button until the
corresponding icon appears.
2.
The Child Lock indicator flashes.
3.
Press the OK button to confirm.
The Child Lock indicator is shown.
To switch off the function:
1.
Press the Functions button until the
Child Lock indicator flashes.
2.
Press the OK button to confirm.
3.
The Child Lock indicator goes off.
Intensive Cooling function
If you need to insert a large amount of
warm food, for example after doing the gro-
cery shopping, we suggest activating the
Intensive Cooling function to chill the prod-
ucts more rapidly and to avoid warming the
other food which is already in the refrigera-
tor.
To switch on the function:
1.
Press the Functions button until the
corresponding icon appears.
The Intensive Cooling indicator flashes.
2. Press the OK button to confirm.
The Intensive Cooling indicator is
shown.
The Intensive Cooling function shuts off au-
tomatically after approximately 6 hours.
To switch off the function before its auto-
matic end:
1. Press the Functions button until the In-
tensive Cooling indicator flashes.
2. Press the OK button to confirm.
43
