709050
43
Zoom out
Zoom in
Previous page
1/53
Next page
85
DE
Wenn Sie eine zeitgesteuerte
Trocknung einstellen wollen,
drücken Sie die Taste
„Einstellung
Trocknungsprogramm“,bis die
Anzeige der gewünschten
Zeit aufleuchtet.
Drücken Sie die START Taste.
Während des Waschgangs
bleibt der
Programmwahlschalter bis
zum Ende des Programmes
auf dem gewählten
Programm stehen.
Am Ende des Programms
erlöschen die Anzeigen der
Waschfunktionen und im
Display wird die
Trocknungszeit angezeigt.
Anschließend wird das Gerät
das Trockenprogramm
durchführen.
Die Anzeige des
Trocknungsprogramms bleibt
eingeschaltet,bis die
Abkühlphase eingeleitet wird,
wobei dann die Anzeige ( )
aufleuchtet.
Am Ende des Programms
erscheint auf dem Display die
Meldung“END”.
Warten Sie, bis die
Türverriegelungsanzeige
ausgeht (2 Minuten nach
Programmende).
Schalten Sie die ab und
Waschmaschine stellen Sie
den Programmwahlschalter
auf die Position OFF
Das Bullage öffnen und die
Wäsche entnehmen.
Schließen Sie den
Wasserhahn.
84
Se vuole impostare un’
asciugatura a tempo prema
il tasto “Selezione
programma
asciugatura”fino all’
accensione di una delle
spie tempo.
Prema il tasto di avvio.
Il ciclo di lavaggio avverrà
con la manopola
programmi ferma sul
programma selezionato sino
alla fine del lavaggio.
Al termine del programma si
spengono le spie delle
funzioni di lavaggio e sul
display viene mostrato il
tempo di asciugatura.
Successivamente la
lavasciuga eseguirà tutto il
programma di asciugatura.
La spia del programma di
asciugatura rimarrà accesa
fino alla fase di
raffreddamento che verrà
segnalata con l’accensione
della spia ( ).
Alla fine del programma sul
display viene visualizzata la
scritta “END”.
Attendete lo spegnimento
della spia oblò bloccato (2
minuti dalla fine del
programma).
Spegnere la lavabiancheria
portando la manopola
programma in posizione OFF.
Apra l’oblò e tolga i tessuti.
Chiuda il rubinetto dell’
acqua.
IT
Si vous désirez sélectionner un
séchage minuté,appuyez sur
la touche " Séchage " jusqu’à
atteindre le niveau de temps
désiré.
Appuyer sur la touche
"DÉBUT/PAUSE".
Le cycle de lavage se
réalisera avec la manette
des programmes arrêtée sur
le programme sélectionné
jusqu'à la fin de celui-ci.
Une fois le programme
terminé, les voyants des
fonctions de lavage
s’éteignent et le temps de
séchage s’inscrit sut l’écran.
La machine exécute alors la
totalité du programme de
séchage.
Le voyant du programme de
séchage restera allumé
jusqu’à la phase de
refroidissement ( ).
Lorsque le programme est
terminé, les lettres " END "
s’inscrivent sur l’écran.
Attendez que le verrou de
porte se désactive.Le voyant
lumineux "" Témoin de
verrouillage de porte "
s’éteint après environ 2
minutes;
Mettez la machine à l’arrêt
en tournant le sélecteur de
programme à la position OFF.
Ouvrez la porte et enlevez le
linge.
Fermer le robinet d’eau.
FR
If you wish to select a timed
drying cycle,press the
“drying programme
selection”button until the
required time indicator lights
up.
Press the "Start/Pause"
button.
The programme carries out
with the programme selector
stationary on the selected
programme till cycle ends.
At the end of the wash
phase the display will shown
the drying time remaining.
The washer-dryer will then
complete the entire drying
programme.
The drying programme
indicator will be on until the
cool down phase will begin
and the indicator ( ) will
go on.
At the end of the
programme the word “END”
will appear on the display.
Wait for the door lock to be
released (about 2 minutes
after the programme has
finished).
The "Door Security" indicator
light will go out.
Switch off the machine by
turning the programme
selector on the “OFF”
position.
Open the door and remove
the laundry.
Turn off the water supply
after every use.
EN
Si desea seleccionar un
secado mediante tiempo,
accione la tecla “selección
programa secado”hasta el
encendido de uno de los
indicadores del secado por
tiempo.
Accione la tecla START
El ciclo de lavado
mantendrá el mando
programador fijo sobre el
programa seleccionado
hasta la finalización del
lavado.
Al finalizar el prgrama se
apagan los indicadores de
las funciones de lavado y en
el display aparece el
tiempo de secado.
Sucesivamente la
lavasecadora seguirá todo
el programa de secado.
El indicador del programa
de secado quedará
encendido hasta la fase de
enfriamiento que será
señalada con el encendido
de su indicador ( ).
Al final del programa,en el
display aparecerá la
palabra “END”.
Espere hasta que se
apague el piloto de puerta
asegurada (2 minutos
después de finalizar el
programa).
Apague el aparato
colocando el mando
selector de programas en
posición “OFF”.
Abra la puerta y extraiga la
ropa.
Cierre el grifo del agua
ES
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Novamatic by Hoover WT 1496 E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Novamatic by Hoover WT 1496 E in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info