Adjusting the suction nozzle (fig. F)
The floor surface selector (13) can be set to
adjust the suction nozzle (12) to the required
floor surface. The floor surface selector (13)
can be operated by hand or foot.
For vacuuming on laminates, tiles, etc., •
press the corresponding part (A) of the
floor surface selector (13).
For vacuuming on carpets, press the •
corresponding part (B) of the floor surface
selector (13).
Switching on and off (fig. A)
The on/off button (1) can be operated by hand
or foot.
To switch on the appliance, press the on/off •
button (1).
To switch off the appliance, press the on/off •
button (1) again.
Adjusting the suction force (fig. A)
The speed control switch (3) can be used to
adjust the suction force.
Set the speed control switch (3) to the •
required position:
- For vacuuming on hard surfaces
(e.g. floors), set a high suction force.
- For vacuuming on soft surfaces
(e.g. upholstery), set a low suction force.
Adjusting the airflow (fig. A)
The airflow can be adjusted using the airflow
control switch (11).
To adjust the airflow, set the airflow control •
switch (11) to the required position.
Carrying the appliance (fig. A)
The appliance can be carried using the
handgrip (5).
Raise the handgrip (5) into position.•
Carry the appliance using the handgrip (5).•
Temporarily parking the suction
nozzle (fig. G)
To temporarily park the suction nozzle, •
use the park position as shown.
Cleaning and maintenance
Warning!
- Before cleaning or maintenance, remove
the mains plug from the wall socket and
wait until the appliance has cooled down.
- Do not immerse the appliance in water or
any other liquids for cleaning.
Caution!
- Do not use aggressive or abrasive cleaning
agents to clean the appliance.
- Do not use sharp objects to clean the
appliance.
Regularly check the appliance for possible •
damage.
Regularly clean the ventilation slots using •
a soft brush.
Store the appliance in a dry place, out of •
the reach of children.
Emptying the dust compartment
(fig. A, B & H)
The dust compartment (6) must be emptied
when the full indicator (4) comes on.
Keep the release button (7) pressed and •
pull the dust compartment (6) from the
appliance.
Press the release button (25) and open the •
cover (26).
Carefully tap the dust compartment (6) with •
your hand to remove the dust.
Close the cover (26) until the release •
button (25) clicks into place.
Insert the dust compartment (6) into the •
appliance until the release button (7) clicks
into place.
Cleaning the round filter (fig. B & H)
Keep the release button (7) pressed and pull •
the dust compartment (6) from the appliance.
Press the release button (25) and open the •
cover (26).
If necessary, empty the dust compartment •
(6).
Turn the round filter (27) clockwise to remove •
the filter from the dust compartment (6).
Remove the dust from the round filter (27) •
using a soft brush.
Turn the round filter (27) counterclockwise to •
insert the filter into the dust compartment (6).
