Manual Nova 330300 (page 10 of 32) (English, German, Dutch, French, Italian)

46040

Zoom out

Zoom in

1/32

Cyclone Cleaner 2000 Article 330300

1 Adjust the telescopic tube to the

required length (see figure 4). Push the

locking button in the direction indicated

by the arrow on the button. Keep the

locking button pressed and extend or

retract the telescopic tube. Release the

locking button to lock the telescopic

tube to the desired length.

2 Fit the combi nozzle or one of the other

accessories to the end of the tube. You

can also fit the combi nozzle or one of

the other accessories directly to the end

of vacuum cleaner hose handle.

The combi nozzle has two settings: with

a brush for vacuuming hard floors

(parquet, tiles, linoleum, etc.) and

without a brush for vacuuming soft

floors (carpet, etc.). Press the button on

the combi nozzle to either vacuum with

a brush ( ) or without a brush

( ) (see figure 5).

Vacuuming

1 The power cord has a yellow mark and

a red mark on it (see figure 6). Extend

the power cord beyond the yellow mark.

The red mark indicates the end of the

power cord. Never extend the cord

beyond the red mark. This could

damage the power cord.

2 Insert the plug into a plug socket and

press the On/Off switch. Press the On/

Off switch again to turn the appliance

off.

3 Use the handle on the vacuum cleaner

hose to move the appliance back and

forth whilst vacuuming. You can lift the

appliance using the vacuum cleaner’s

handle.

Note! Never lift the vacuum cleaner

using the dust collector's handle!

4 The suction force can be adjusted

whilst vacuuming using the button that

adjusts the suction force. The suction

force can also be temporarily reduced

by opening the air supply control slide

on the vacuum cleaner hose handle.

5 Press the On/Off button to turn the

appliance off.

Accessories

Besides the combi nozzle for cleaning

large surfaces, there are also two

accessories for cleaning smaller and

special surfaces:

• A crevice tool, to clean radiators,

window frames, crevices, small

openings, etc.

• A small nozzle, to clean delicate or

irregular surfaces, furniture, Venetian

blinds, etc.

Storing the appliance

1 Remove the plug from the plug socket.

2 Lightly hold the end of the power cord.

Press the cord rewind button and allow

the cord to gently slide through your

fingers back into the appliance.

Note! You must guide the cord whilst it

is rewinding. If you do not do so, the

cord may become tangled or the plug

may strike the back of the appliance.

This can damage the appliance or the

power cord.

3 Stand the vacuum cleaner upright. Fully

retract the telescopic tube. A slot for the

telescopic tube is located at the bottom

of the vacuum cleaner, next to the front

castor. Slide the holder on the telescopic

tube into the slot (see figure 7). This

avoids the need to dismantle the

vacuum cleaner after use; you can

store the assembled appliance and

retrieve it again quickly when you need

it.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nova 330300 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nova 330300 Manual

Product: