512819
12
Zoom out
Zoom in
Previous page
1/39
Next page
9
Steam Station Star Deluxe Article 320300
Some parts of the iron are lightly greased,
and it is possible that the iron will emit a
little smoke when used for the first time.
This smoke will stop after a short period of
time, and is not indicative of a defect.
3 To remove residue from the soleplate,
set the temperature control dial to
‘max’, and iron over a damp cloth.
Preparing the appliance for use
It is recommended that you fill the
water reservoir with a mixture of 50%
tap water and 50% distilled water. This
is particularly desirable in areas with
hard water, since this will prevent the
formation of excessive limescale.
Make sure the water reservoir is
always filled, even if you do not plan
to use the steam function.
1 Place the appliance on a flat sturdy
surface.
2 Make sure the appliance is not plugged
in.
3 Use your thumb to press the reservoir
lock (No.13) downwards, and pull the
reservoir forwards with your fingers.
4 Fill the water reservoir with the
indicated quantity of water (no higher
than the ‘max’ level).
5 Replace the water reservoir by
positioning the base over the projection
and then clicking the top in place.
Use
Never iron over zips, rivets in jeans,
etc. These will damage the soleplate.
Iron around any such objects.
The steam generators holder for the
iron will become hot. Do not touch it
whilst you are ironing.
Never point the soleplate at persons
during use, steam is very hot.
Check whether ironing-instruction
labels are attached to clothing. Always
observe any such instructions.
The filling aperture of the water
reservoir must not be opened during
use.
Do not remove the Calc Clean
descaling cap from the body of the
generator at any time. Behind the cap
is a water outlet which connects
directly to the steam generator and it
is very hot during use!
Make sure that the appliance can not
fall when you place the iron on the
holder.
Dry ironing
1 Fill the water reservoir (No.10).
2 Put the iron on the steam generator’s
holder (No.11).
3 Put the plug in the wall socket.
4 Turn on the ON/OFF switch and turn
the iron’s temperature-control dial
(No.2) to adjust the temperature to the
required setting. The iron starts heating.
5 Adjust the temperature in accordance
with the directions given in table 1.
6 When the indicator light on the iron
(No.3) turns off, the temperature is
reached. You now can start ironing.
Steam ironing
1 Fill the water reservoir.
2 Put the iron on the steam generator’s
holder.
3 Put the plug in the wall socket.
4 Make sure that there is enough water in
the reservoir.
5 Set the on/off switch steam generator
(No.6) to ‘I’. The steam generator starts
to pump the water and heat it. The
indicator light “steam ready” illuminates
when steam is ready.
6 Meanwhile adjust the temperature by
turning the iron’s temperature-control
dial to the required setting. Adjust the
temperature in accordance with the
directions given in table 1.
1081656_nova_steam station_320300_V1.book Page 9 Tuesday, August 26, 2008 12:20 PM
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nova 320300 Steam Station at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nova 320300 Steam Station in the language / languages: English, German, Dutch, French, Italian, Spanish, Spanish as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info