493108
14
Zoom out
Zoom in
Previous page
1/39
Next page
11
Steam Station Star Article 320200
Maintenance
and cleaning
Never move the steam generator
whilst it is switched on or is still hot.
Switch off the appliance, and wait until
it has cooled down before you move it.
Never immerse the appliance, the
power cord or the plug in water or
other liquids. If this happens do not
use the appliance any more; dispose
of the appliance.
Never use corrosive or scouring
cleaning agents.
Never scrape over the soleplate with
metal objects.
Never add vinegar or other cleaning
agents to the water reservoir when
ironing. This could damage the
clothing.
Clean the appliance thoroughly after
use.
Make sure the appliance is not
plugged into the plug socket when
you are going to clean it.
Maintenance
1 Remove the plug from the wall socket
and allow the appliance to cool down
completely before cleaning it.
2 Always drain all the water from the
reservoir after each use.
3 Wipe limescale and other fouling from
the soleplate using a damp cloth and a
non-abrasive cleaner.
4 Clean the iron’s housing with a soft
damp cloth.
Descaling
The guarantee does not cover
limescale complaints or problems.
To prolong the useful life of your steam
station and prevent limescale descale the
appliance once a month.
1 Rinse the reservoir with clean water.
2 Fill the reservoir with water and vinegar
in a 1:10 mixture or with a special
descaling agent available from
(hardware) stores.
Always verify that the descaling agent
is suitable for use with irons! Follow the
directions given on the package.
3 Install the cap on the water reservoir
and screw it tightly.
4 Put the plug in the wall socket and
switch on the appliance.
5 Set the steam generator switch (No.9)
to ‘I’ and wait until the indicator light
"steam ready" on the base's control
panel (No.7) will light.
6 Allow the descaling agent to flow
through the appliance by pressing the
steam button for about 2 minutes.
7 Switch off the appliance, remove the
plug from the wall socket and leave the
appliance one night over to have the
descaling detergent do its job.
8 Rinse the reservoir a few times with
clean water and fill the reservoir with
clean water.
9 Install the cap on the water reservoir
and screw it tightly.
10 Put the plug in the wall socket and
switch on the appliance.
11 Set the steam generator switch (No.9)
to ‘I’ and wait until the indicator light
"steam ready" on the base's control
panel (No.7) will light.
12 Allow the clean water to flow through
the appliance by pressing the steam
button.
Repeat this step until the appliance is
completely filled with clean water.
1081656_nova_steam station_320200_V1.book Page 11 Tuesday, August 26, 2008 12:08 PM
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nova 320200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nova 320200 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info