448874
12
Zoom out
Zoom in
Previous page
1/29
Next page
301UM0030_01 PD130 Enhanced Vehicle Detector User Manual Page: 12 of 29
4. PRINCIPAL OF OPERATION
The inductive loop vehicle detector senses the presence of a vehicle over an area defined by a loop of
two or more turns of wire, laid under the road or pavement surface. This loop of wire is connected to
the detector by a twisted pair of wires called a loop feeder.
A vehicle passing over a sensing loop causes a small reduction in the inductance of the loop, which is
sensed by the detector. The sensitivity of the detector is adjustable to accommodate a wide range of
vehicle types, as well as different loop and feeder combinations.
Upon detection of a vehicle passing over the loop the detector operates its output relays, which may
be used to indicate controls associated with the installation.
4.1 Detector Tuning
Tuning of the detector is fully automatic. When power is applied to the detector upon installation of the
system, or when a reset is initiated, the detector will automatically tune itself to the loop to which it is
connected. The detector will tune to any loop with an inductance in the range 20 to 1500 micro-henries
(µH).
This wide range ensures that all loop sizes and feeder combinations will be accommodated in the
tuning range of the detector.
Once tuned, any slow environmental change in loop inductance is fed to a compensating circuit within
the detector, which keeps the detector correctly tuned.
4.2 Detector Sensitivity
Sensitivity of the detection system is dependent on factors such as loop size, number of turns in the
loop, feeder length and the presence of metal reinforcing beneath the loop.
The nature of the application determines the required sensitivity, which may be adjusted by means of
the sensitivity switches on the front of the enclosure.
Sensitivity levels of the PD130 Enhanced Vehicle Detector have been carefully optimised for parking
and vehicle access control applications. The detection of small unwanted objects such as bicycles and
trolleys can be eliminated by selecting lower sensitivity levels whilst high-bed vehicles and
vehicle/trailer combinations will not lose detection by using A
utomatic Sensitivity Boost (ASB) option.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nortech PD-132 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nortech PD-132 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info