493119
16
Zoom out
Zoom in
Previous page
1/20
Next page
16
· Secure the hob in place by putting it into cutout on the work surface.· Secure the
hob in place by putting it into cutout on the work surface.
· Before inserting the oven, it is necessary to remove the rear kitchen element panel
in the area of the oven opening, in order to supply cooling. Equally, the front part
of the kitchen base must have an opening of no less than 5 mm.
Installing your hob above an oven
Making an electrical connection
Before making a connection, check that:
· The mains voltage is the same as that quoted on the rating plate which is situated
at the back of your hob.
· The circuit can support the appliance load (see the rating plate).
· The power supply has an earth connection, which complies with the provisions of
current regulations and is in good working order.
· The fused switch is easily accessible once the hob has been installed.
If there is no dedicated hob circuit and fused switch, they must be installed by a
qualified electrician before the hob is connected.
Min. 5mm
Min. A*
Min. 10mm
Ensure that the unit crossbar does not black the
air possage, make a bevel if necessary
*If built-in oven has
cooling fan system,
A must be minimum
25mm and if it doesnt
have cooling fan system,
A must be minimum 35mm
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nordmende HCI60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nordmende HCI60 in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info