69783
24
Zoom out
Zoom in
Previous page
1/36
Next page
24
Malfunction Possible Cause / Solution
The washer-dryer does not start:
The door has not been closed. E40
Close firmly the door.
The plug is not properly inserted in the power socket.
Insert the plug into the power socket.
There is no power at the socket.
Please check your domestic electrical installation.
The main fuse has blown.
Replace the fuse.
The selector dial is not correctly positioned and the
button
8 has not been pressed.
Please turn the selector dial and press the button 8
again.
The «Child Safety Lock» or the «Delay start»
function option has been selected.
Disable the «Child Safety Lock» or the «Delay
start» function.
The machine does not fill:
The water tap is closed. E10
Open the water tap.
The inlet hose is squashed or kinked. E10
Check the inlet hose connection.
The filter in the inlet hose is blocked. E10
Clean the water inlet hose filter.
The door is not properly closed.
E40
Close firmly the door.
What to do if...
IMPORTANT!
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily
without calling out an engineer. Before contacting your local Service Centre, please carry out the
checks listed below.
During machine operation it is possible that the red pilot light of the button
8 blinks, the buzzer
sounds and one of the following alarm codes appears on the display to indicate that the machine
is not working.
E10: problem with the water supply
E20: problem with water draining
E40: door open.
Once the problem has been eliminated, press the button 8 to restart the programme. If after all
checks, the problem persists, contact your local Service Centre.
132966720_GB.qxd 29/05/2009 11.34 Page 24
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nordland WD 8126 EL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nordland WD 8126 EL in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nordland WD 8126 EL

Nordland WD 8126 EL User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info