35
GB
Change of door opening
direction
Should the setting-up place or
handling demand it, door-opening
direction can be refitted from right-
handed to left-handed.
Following operations are to be done
on the basis of figures and
explanations:
Break the circuit of the appliance.
Tilt back the appliance carefully
being careful so that the
compressor can not touch the floor.
It is recommended to ask another
person for help, who can keep the
appliance at this position safely.
Unscrew the adjustable feet
situated on both sides (2 pieces), in
addition the screws fixing the lower
door holders (2 pieces) and the
screw on the other side
respectively.
Take off the freezer door by pulling
it slightly downwards.
Unscrew the top door hinge pin of
the refrigerator then screw it back
on the other side.
Fit the freezer door on the upper
door hinge pin.
Put over the pin in the lower door
holding plate in the direction of the
arrow.
Take the door off.
Unscrew the top door holding pin
and put it on the other side.
Put over the handles on the other
side and put the plastic covering
nails supplied in the plastic bag of
this instruction book into the holes
set free.
Put the appliance to its place, set it
level and apply voltage to it.
In case you do not want to perform the
procedures above, call the nearest
brand-mark service. Technicians will
accomplish the refitting expertly for
charge.
