122043
38
Zoom out
Zoom in
Previous page
1/44
Next page
38
GB
Fix the bottom door holder onto the left
side using the screws (2 pieces) and
the adjustable foot as well as screw the
2 pieces screws on the opposite side
into the vacant holes. Be careful that
the door edge of the refrigerator is par-
allel with the edge of the mantle.
Put over the handle on the opposite
side and cover up the vacant holes
with the plastic nails from the bag of
instruction book.
After released the screws the adapta-
tion of the doors can be adjusted with
the horizontal control of central door
holder.
Put the appliance to its place, set it
level and connect to the electricity sup-
ply.
In case you do not want to perform the
procedures above, call the nearest brand-
mark service. Technicians will accomplish
the refitting expertly for charge.
Take off the door of the refrigerator by
pulling it slightly downwards.
Dismount the double door holder by
removing the screws (2 pieces).
Take off the door of the freezer by
pulling it slightly downwards.
Unscrew the top door holding pin of
the freezer, then screw it back on the
other side.
Remove the covering nails of the dou-
ble door holder on the left side and put
them to the other side.
Fit the door of the freezer to the top
door holding pin.
Fix the double door holder onto the left
side using the screws (2 pieces). Be
careful that the door edge of the freez-
er is parallel with the edge of the man-
tle.
Fit the door of the refrigerator to the
double door holding pin.
Electrical connection
This refrigerator is designed to oper-
ate on a 230 V AC (
~
) 50 Hz supply.
The plug must be put into a socket
with protective contact. If there is no
such, it is recommended to get an
electrician to fit an earthed socket in
compliance with standards near the
refrigerator.
This appliance complies with the
following E.E.C. Directives:
73/23 EEC of 19.02.73 (Low Voltage
Directive) and subsequent modifica-
tions,
89/336 EEC of 03.05.89
(Electromagnetic Compatibility
Directive) and subsequent modifica-
tions.
96/57 EEC - 96/09/03 (Energy
Efficiency Directive) and its subse-
quent amendments
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nordland NDD 8230 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nordland NDD 8230 in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info