669907

NordicTrack NTEX05117.0-395775 - S10i StudioCycle Manual

30
Zoom out
Zoom in
Previous page
1/36
Next page
30
Next, remove all of the Screws (not shown) attach-
ing the Right and Left Shields (30, 32); make sure
to remember where the two shortest Screws are
located. Then, move the Left Shield out of the way
until you can reach the Reed Switch (115).
Slightly loosen the two M4 x 16mm Screws (83). Next,
rotate the Right Crank Arm (not shown) until a Pulley
Magnet (137) is aligned with the Reed Switch (115).
Slide the Reed Switch slightly toward or away from the
Pulley Magnet. Then, retighten the Screws.
Plug in the power cord and rotate the Right Crank Arm
(not shown) for a moment. Repeat these actions until
the console displays correct feedback.
When the reed switch is correctly adjusted, reattach
the right and left shields and the left crank arm.
HOW TO ADJUST THE DRIVE BELT
If you can feel the pedals slip while you are pedaling,
even when the resistance is adjusted to the highest
setting, the drive belt may need to be adjusted.
To adjust the drive belt, first unplug the power cord.
Then, follow the instructions at the right. Note: The
drawings show only the right side of the studio cycle.
Remove the indicated M4 x 16mm Screw (83) and the
Shield Cover (31) from each side of the studio cycle.
Next, loosen the M10 Axle Nut (27) on each side of
the studio cycle, and tighten the Adjustment Nut (26)
on each side of the studio cycle one half turn. Then,
firmly retighten the M10 Axle Nuts.
Plug in the power cord and pedal the studio cycle to
test the adjustment. If necessary, repeat the above
actions until the pedals no longer slip.
When the drive belt is properly adjusted, reattach the
shield covers.
115
30, 32
83
137
83
31
26
27
… 30 …


Need help? Post your question in this forum.

Forumrules
1

Forum

nordictrack-ntex05117.0-395775---s10i-studiocycle

Reset search

  • I am having trouble peddling the wheels are way too tight. I adjusted the reed switch to 1/8" from the Pulley Magnet. Still way too tight.
    Submitted on 1-11-2021 at 23:12

    Reply Report abuse

  • My Pedal keeps coming lose even after I tighten the screws really frustrating any any ideas on how to fix ? Submitted on 1-1-2021 at 18:56

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NordicTrack NTEX05117.0-395775 - S10i StudioCycle at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NordicTrack NTEX05117.0-395775 - S10i StudioCycle in the language / languages: English as an attachment in your email.

The manual is 10,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info