704357
11
Zoom out
Zoom in
Previous page
1/43
Next page
8
Verifying Avant 9600 Operation
Press the ON/STANDBY button. When the unit is first turned on, the Avant 9600
performs a brief startup (initialization) sequence. Verify that all LEDs illuminate and
the unit beeps three times during the first phase of the startup sequence. If any LED
is not lit (except the AC Power Adapter LED), do not use the Avant 9600. Contact
NONIN Customer Support for assistance.
In order to verify that the Avant 9600 is functioning properly, it is important to
monitor SpO
2
and pulse rate readings. Use the following procedure to verify that
the pulse oximeter sensor is functioning properly.
1. Ensure that the Avant 9600 is on, with the sensor connected.
2. Apply the pulse oximeter sensor.
3. Verify that a good SpO
2
reading is displayed, that a pulse rate value appears,
and that the pulse strength bargraph LED is active.
Displays, Indicators, and Controls
This section describes the Avant 9600’s displays, indicators, and controls.
Avant 9600 Parameter Displays
%SpO
2
Display
The %SpO
2
display is located on the upper left-hand corner of the Avant 9600 and
is identified by the %SpO
2
symbol. This display shows blood oxygen saturation in
percent.
Pulse Rate Display
The pulse rate display is located on the upper right-hand corner of the Avant 9600
and is identified by the symbol. This display shows the pulse rate in beats per
minute.
Numeric LEDs
Numeric LEDs display %SpO
2
and pulse rate values. When setting
the device, these LEDs also display values for alarm limits, volume,
year, month, day, hour, and minute displays. The numeric LEDs are
also used for setting Data Output mode.
Under normal conditions, these LEDs display in green. For high
priority (patient) alarms, the corresponding values are displayed in
red, blinking fast. The values are displayed in amber when reviewing
or changing settings.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nonin Avant 9600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nonin Avant 9600 in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nonin Avant 9600

Nonin Avant 9600 User Manual - German - 47 pages

Nonin Avant 9600 User Manual - Dutch - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info