704355
12
Zoom out
Zoom in
Previous page
1/32
Next page
6
Displays and Indicators
Displays and Indicators
SpO
2
Display
The SpO
2
display is identified by the SpO
2
symbol. This 3-digit light-emitting diode (LED) display
shows the current oxygen saturation percentage.
Pulse Rate Display
The Pulse Rate display is identified by the symbol. This 3-digit LED display shows the pulse rate
in pulses per minute.
Pulse Quality Indicator
The Pulse Quality Indicator display (identified by the symbol) is a tricolor LED that blinks once for
each detected pulse. The color of the Pulse Quality indicator changes with the pulse strength signal,
as described below.
Green indicates a good pulse strength signal.
Amber indicates a marginal pulse strength signal. To improve signal quality, reposition the sensor, try
a different sensor type, reduce patient movement, or improve the site’s circulation.
Red indicates an inadequate pulse strength signal. While the Pulse Quality display is red, SpO
2
and
pulse rate values are not updated. After about 10 seconds, the values are replaced with dashes,
indicating that readings are not possible.
Low Battery Indicator
When battery capacity is low, the display will blink once each second. If the batteries are not replaced,
they will reach critically low capacity and the display will blink dashes. The Pulse Quality LED will blink
red or amber, not green. After 10 minutes of critically low battery capacity, the display will go blank.
Sensor Fault or Inadequate Signal Display
If the device determines that a sensor fault or inadequate signal condition exists (a sensor disconnect,
failure, misalignment or incompatibility with the monitor) or if a pulse oximeter sensor signal is no
longer detected, a dash (-) appears in the leftmost position of the SpO
2
display. The readings that are
displayed will freeze for 10 seconds if the pulse oximeter sensor fault or the inadequate signal
continues.
If the sensor fault or the inadequate signal is not corrected, the frozen readings and the dash in the
leftmost position will be replaced by dashes in the middle of both the SpO
2
and the Pulse Rate
displays.
When the sensor fault or the inadequate signal is corrected, the SpO
2
and pulse rate displays will
return to normal operation.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nonin 8500M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nonin 8500M in the language / languages: English as an attachment in your email.

The manual is 3,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nonin 8500M

Nonin 8500M User Manual - German - 34 pages

Nonin 8500M User Manual - Dutch - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info