801551
23
Zoom out
Zoom in
Previous page
1/32
Next page
21
The vibration setting is restored to the final saved
setting when the device is turned off and on again. This
setting is common in all modes; change made in any
mode also applies to the other modes.
Brightness
It enables you to adjust the display and keypad
backlight level according to your personal preference. It
works in 2 different ways: Continuously or automatically
meaning the backlight lights up only for a short period
of time when a target is detected or while navigating
the menu and then it goes off. The default setting is
automatic.
To adjust the Brightness, use the plus (+) and minus
(-) buttons. The dotted boxes indicate the automatic
backlight level and the solid ones indicate the continuous
backlight level. To switch from automatic to continuous,
keep pressing the plus (+) or the minus (-) button. When
the box is not selected, it means that the backlight is
off. The continuous operation of the backlight will affect
power consumption, which is not recommended.
4
99
The backlight setting is restored to the final saved
setting when the device is turned off and on again. This
setting is common in all modes; change made in any
mode also applies to the other modes.
LED Flashlight
It is the headlight used for lighting the area you are
scanning while detecting at night or in dark locations.
To turn on or off the LED Flashlight, after selecting it
in the settings menu, use the plus (+) and minus (-)
buttons.
4
99
The LED Flashlight will always revert back to off
position when the device is turned off and on again.
This setting is common in all modes; change made in
any mode also applies to the other modes.
LED Flashlight does not operate when the device is off.
It is recommended to turn it on only when necessary
since its operation consumes extra battery power.
Save and Factory Defaults
SIMPLEX will save all settings automatically once you
turn your detector off and on again except for the ones
listed below:
Ground Balance, Iron Off, Ground Suppressor, Frequency
Shift and LED Flashlight.
To revert back to factory defaults, press the plus (+) or
the minus (-) button once. After hearing 3 beeps, the
device will revert back to factory defaults and go back
to the main screen.
4
99
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nokta Simplex LITE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nokta Simplex LITE in the language / languages: English as an attachment in your email.

The manual is 5.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nokta Simplex LITE

Nokta Simplex LITE User Manual - Turkish - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info