in the st atic modes only in case of o v erload. When vibr ation is activ e,
the vibr ation icon on the INFO bar will turn green, when vibr ation is
disabled, it will turn red.
Vibr ation may not be f elt in the All Met al mode with w eak signals; it
will be f elt as the signal gets stronger . In other w ords, vibr ation does
not st art at the depth where the audio t ones are heard but at a lesser
depth. Therefore, if you are det ecting with vibr ation only and audio
t ones are off , you can miss w eak er and deeper signals.
Vibr ation speed is const ant in the pinpoint mode and cannot be
adjust ed. Vibr ation is off at 0 position. 1-5 v alues pro vide the same
le v el of vibr ation in the pinpoint mode. When vibr ation is used in the
pinpoint mode, vibr ation speed increases as the t arget is approached
and it reaches the maximum le v el o v er the cent er of the t arget. When
you turn off and on the de vice, it will st art with the last vibr ation le v el
you chose.
KEYPRESS V OLUME
It is used t o adjust the v olume of the k eypress sounds according t o
your personal pref erence by using the plus (+) and minus (-) butt ons .
It has 5 le v els. As the le v el goes up, the v olume goes up and vice v ersa.
At 0 le v el, the v olume will be off and no sound will be heard when the
k eys are pressed.
BRIGHTNESS
It enables you t o adjust the screen backlight le v el according t o your
personal pref erence. It r anges betw een 0-10 and it is adjust ed by
the plus (+) and minus (-) butt ons. At 0 le v el, the backlight is off . At
10, brightness will be maximum. The maximum le v els of the of the
backlight will aff ect po w er consumption, so w e recommend t o set it
t o lo w er le v els.
KEYP AD B A CKLIGHT
It enables you t o adjust the backlight of the syst em bo x and handle
k eypads. It has 7 le v els and it is adjust ed by the plus (+) and minus (-)
butt ons. At 0 le v el, the k eypad backlight is off . At 7, k eypad brightness
will be maximum. The maximum le v els of the of the k eypad backlight will
aff ect po w er consumption, so w e recommend t o set it t o lo w er le v els.
LANGU A GE
It is used t o change the oper ating language of the de vice. INVENIO can
be used in 17 diff erent languages. The de vice will st art up in the def ault
language set by the f act ory. You can change the language by selecting
this option and using the plus (+) and minus (-) butt ons. Once you select
the language, just press OK and the de vice will switch t o that language
aut omatically. When you turn off and on the de vice, it will st art with the
last language you chose.
TIME/D A TE
It is used t o adjust the time and dat e. By using the plus (+) and minus
(-) butt ons, select the option (hour , minut e, day etc.) you w ant t o adjust.
The selection will be mar k ed in red. A djust it using the up and do wn
butt ons. Once the adjustment is done, press the OK butt on t o sa v e.
Once the time and dat e are set, you can only change them manually
again. In other w ords, e v en if you set the de vice t o f act ory def aults, the
time and dat e will st ay the same.
NO TE : If the time and dat e change each time you turn off and on the
de vice, the clock batt ery may be dying. Please get in t ouch with your
dealer or t echnical service.
CM/INCH
It is used t o change all the units of lengths (depth, height, width etc.)
from centimet ers t o inches. It is adjust ed with the plus (+) and minus
(-) butt ons. The select ed unit will be mar k ed in red.
O THERS
SOFTW ARE UPD A TE
This option sho ws the softw are v ersion inst alled on your de vice
and it also enables you t o updat e your de vice. All softw are
updat es for the INVENIO will be published on the product page at
www .no kt adet ect ors.com . You can follo w all updat es and instructions
from this page.
F A CT OR Y SETTINGS
It is used t o set all the options and settings of the de vice back t o its
f act ory def aults.
When the f act ory def aults are rest ored, all settings except for the time,
dat e and language will be changed.
T o rest ore the f act ory settings, press the OK butt on when the option
is select ed. ''The syst em will be rest ored t o f act ory def aults. Are you
sure you w ant t o continue?'' message will appear on screen. If you
press OK, you will see the second message ''Do you also w ant t o delet e
all your sa v ed files in the archiv es?''. Once you respond with yes or
no t o this, the message ''Do you w ant t o reset the neur al netw or k t o
f act ory def aults?'' will come on screen. Aft er you respond with yes or
no , you will see the message ''Please w ait...'' and a progress bar . Once
the progress bar is full, the de vice will be rest ored t o f act ory def aults
and will st art in the Basic mode.
NO TE : If you answ er yes t o ''Do you also w ant t o delet e all your sa v ed
files in the archiv es?'' all 3D gr aphs and screenshots sa v ed in archiv es
will be delet ed.
NO TE : If you answ er yes t o ''Do you w ant t o reset the neur al netw or k
t o f act ory def aults?'' the de vice will delet e all the changes made in the
neur al netw or k.
ARCHIVES
This section of the de vice enables you t o access all the 3D gr aphs
meaning result screens, the screenshots and the tut orial videos. You
can tr ansf er all the files you sa v ed in archiv es t o an ext ernal USB
driv e as w ell.
Select All
Selects all the folders or files.
Deselect All
Deselects all folders or files.
Copy Select ed
Copies the select ed folders or files t o USB driv e (except for the tut orial
videos).
Delet e Select ed
Delet es the select ed folders or files (except for the tut orial videos).
3D FILES
All the sa v ed 3D gr aphs, in other w ords the result screens, are collect ed
13
OPTIONS
HEDEF ID
You can navigate between the OPTIONS with the up and down buttons.
You can change the value using the plus (+) and minus (-) buttons. If
the up/down and +/- buttons are held down, the options and values
will change rapidly. Options are shown in white. When selected, they
will turn orange. The corresponding values of an option are shown in
white, the selected one will turn red and once adjusted, it will be shown
in yellow .
NOTE : Regardless of the screen you are in, when the OPTONS button
is pressed, the device will display the OPTIONS screen. You can go back
to the previous screen by pressing the BACK button.
FREQUENCY
It is used to change the operating frequency of the device. INVENIO
works at 14kHz only. Therefore, this option is not selectable in INVENIO
and it is active in INVENIO Pro only.
After selecting the FREQUENCY option, change the frequency using
the plus (+) and minus (-) buttons. You will hear the sound of the relay
circuit in the shaft; this is normal.
INVENIO offers 3 operating frequencies — 5kHz, 14kHz and 20kHz— to
suit different t arget and soil types. Based on the frequency selected,
the detector' s detection performance for different types of t argets will
vary. The list below includes, but are not limit ed to, different types of
targets that correspond t o each frequency :
5kHz : Large ferrous and non-ferrous objects - High conductives (silver ,
copper etc.) - Medium or relatively small targets in non-mineralized
ground without iron trash - Ferrous masses and militaria.
14kHz : Gener al use - Different size targets in medium-highly
mineralized ground.
20kHz : Small coins and large objects with diff erent conductivities as
well as thin large coins - Gold coins, rings, small jewelry, sheet iron,
foil - Small targets in iron tr ash.
IMPORT ANT! Please remember to re-ground balance upon changing
the frequency.
FREQUENCY SHIFT
It allows you to shift the frequency in small steps. It is used to eliminate
the electromagnetic interference that the device receives from another
detector which operates in the same frequency range nearby or from
the surroundings. If too much noise is received when the search coil is
lifted in the air , this may be caused by the local electromagnetic signals
or excessive sensitivity settings.
T o eliminate the noise caused by electromagnetic int erference, try
shifting the frequency first before lo wering the sensitivity to obt ain
maximum depth performance. Frequency shift consists of 5 st eps (-2
/ -1 / 0 / +1 / +2). Def ault setting is 0 which is the centr al frequency.
IMPORT ANT! Frequency shift may impair performance. Therefore, it is
suggested that you do not shift the frequency unless it is necessary. In
cases where the interference cannot be eliminated with the frequency
shift, in the INVENIO Pro, the operating frequency of the device (5kHz /
14kHz / 20kHz) may also be changed.
IPTU SENSOR
Allows you to turn on and off the IPTU sensor and switch between 2
detection screens - one with and one without the sensor . The device
will start in detection screen with the IPTU sensor at initial start up. If
you wish, you can turn the IPTU sensor off by using this option and
switch to the det ection screen without the IPTU sensor .
WIRELESS HEADPHONE CHANNEL
It is used to change the channel of the optional wireless headphones.
It consists of 5 channels and an off position. When it is at off , there will
be no wireless connection available for the headphones.
You scan the channels manually or automatically. T o scan manually,
use the plus (+) and minus (-) buttons when the option is selected. Each
time you press the + or the - button, you need to wait approximately 1
second. If you want to scan the channels automatically, press the OK
button when the option is selected. Channels will be scanned one by
one and an automatic connection will be attempted. If you wish, you
can cancel the auto scan by pressing the OK button. If no connection
is made after each channel is auto scanned, the scanning will be
terminat ed.
WIRELESS SHAFT CHANNEL
It is used to change the wireless connection channel of the shaft &
handle. It consists of 32 channels and an off position. When it is at
off , there will be no wireless connection available between the system
box and the shaft & handle. T o scan the channels manually, you can
use the plus (+) and minus (-) buttons. Each time you press the + or
the - button, you need to wait approximat ely 1 second. If you want to
scan the channels automatically, press the OK button when the option
is selected. Channels will be scanned one by one and an automatic
connection will be attempted. If you wish, you can cancel the auto scan
by pressing the OK button. If no connection is made after each channel
is auto scanned, the scanning will be terminated.
VOLUME
This control allows you to increase or decrease the device's volume
based on your preference and environment al conditions. V olume level
can be adjusted from 0 to 10 using the plus (+) and minus (-) buttons.
When the volume is turned off completely, the volume icon on the
INFO bar will turn red. When you turn the volume up, it will turn
green. In addition, while the device is in det ection screen, volume can
be adjusted with the plus (+) and minus (-) buttons directly, without
going into OPTIONS. When you turn off and on the device, it will st art
with the last volume le vel you chose. Because the volume level affects
power consumption, w e recommend you not to increase it more than
necessary.
VIBRA TION
This option is used to adjust the vibration lev el.
This feature provides feedback to the user by producing a vibration
effect when a t arget is det ected. It can be used independently or
together with the audio response. When audio response is disabled,
all feedbacks are provided to the user as vibration only during t arget
detection.
Vibration has 5 levels and it is adjusted with the plus (+) and minus (-)
buttons. When it is set to 0, vibr ation feature is complet ely disabled. If
the vibration is set to the 1st lev el, the device provides long vibration
signals and at 5 it provides short vibration signals. The magnitude of
the vibration eff ect can vary according t o the depth of the t arget and
the swinging speed. Vibr ation works in motion modes only. It w orks
under this folder . R esult screens are filed in chronological order . Gr aphs
sa v ed on the same dat e are numbered and filed in the same folder .
Gr aphs sa v ed on diff erent dat es are filed and list ed according t o the
dat e they w ere sa v ed on. In the folder vie w , next t o the folder , you can
see the dat e and number of records in the folder .
When 3D files are select ed, t o select a folder , press the plus (+) butt on.
The selection bo x will mo v e t o the adjacent section. The select ed folder
will be displayed in or ange. If multiple folders are sa v ed, you can use
the up and do wn butt ons t o na vigat e through them and access them
by pressing the OK butt on. Once you are in the folder , you can select
the record using the directional butt ons and open it by pressing the
OK butt on. When you w ant t o exit, just press the B A CK butt on.
A t ot al of 6 folders and 6 3D gr aphs in each folder will be displayed
on one page. As the number of result screens and folders increase, the
de vice will aut omatically add more pages. The page numbers will be
displayed at the bott om of the screen. By pressing the do wn butt on,
you can go t o page selection and select the page you w ant by using
the plus (+) and minus (-) butt ons. F olders are displayed in chronological
order from lat est t o oldest.
SCREENSHO TS
All screenshots t ak en are st ored in this section.
When screenshots are select ed, t o select a folder , press the plus (+)
butt on. The selection bo x will mo v e t o the adjacent section. The select ed
folder will be displayed in or ange. If multiple folders are sa v ed, you can
use the up and do wn butt ons t o na vigat e through them and access
them by pressing the OK butt on. Once you are in the folder , you can
select the record using the directional butt ons and open it by pressing
the OK butt on. When you w ant t o exit, just press the B A CK butt on.
While an image is displayed on screen, if you press the SETTINGS
butt on, DELETE message will appear at the t op. If you press the OK
butt on, you will see the message ''Are you sure you w ant t o delet e
the select ed it ems?''. Press OK t o delet e and go t o the next record.
A t ot al of 6 folders and 6 screenshots in each folder will be displayed
on one page. As the number of screenshots and folders increase, the
de vice will aut omatically add more pages. The page numbers will be
displayed at the bott om of the screen. By pressing the do wn butt on,
you can go t o page selection and select the page you w ant by using
the plus (+) and minus (-) butt ons. F olders are displayed in chronological
order from lat est t o oldest.
TUTURIAL VIDEOS
In this section, you can find tut orial videos grouped under diff erent
titles. Select the folder you w ant and press the OK butt on. All videos
inside the folder will be list ed. Using the directional butt ons, select the
video you w ant t o w atch and press OK.
Once the video is opened, the butt ons will function as belo w :
Plus (+) and minus (-) butt ons : Controls the v olume.
Up and do wn butt ons : Allo ws you t o na vigat e betw een the videos and
f ast forw ard and re wind them while they are playing.
OK butt on : St arts and pauses the video.
B A CK butt on : Use t o exit the video.
DELETING THE ARCHIVES FILES AND SA VING
You can delet e multiple or individual files in the archiv es or sa v e them
t o a USB driv e (except for the tut orial videos).
T o delet e individual files :
Using the plus butt on (+), select the small bo x next t o the file or folder .
The bo x will turn or ange. When you press the OK butt on, a check mar k
will appear in the bo x and the line will appear blurred. Click the tr ashcan
icon next t o the bo x and press OK. The w arning message ''Are you sure
you w ant t o delet e the select ed it ems?'' will appear on screen. Press OK
t o confirm.
NO TE : When you w ant t o delet e multiple files, you can check the bo x es
next t o the files and use ''Delet e Select ed'' function at the t op.
T o delet e multiple files :
T o delet e multiple files or folders in the archiv es, when the file or the
folder is select ed, go t o ''Select All'' using the up butt on (it will turn
or ange). Then press OK. All small bo x es will be check ed and all the
lines will appear blurred. Then select ''Delet e Select ed'' at the t op and
press OK. The w arning message ''Are you sure you w ant t o delet e the
select ed it ems?'' will appear on screen. Press OK t o confirm.
EXTERNAL USB MEMOR Y USA GE
You can copy the 3D gr aphs and screenshots t o a USB driv e and vie w
them from the USB driv e as w ell. When you insert the USB driv e t o the
de vice, the USB icon in the archiv es screen will appear in whit e. Select
the USB icon using the plus (+) butt on. The icon will turn or ange and the
folders inside will be list ed.
When a USB driv e is insert ed in the de vice, the USB icon will sho w in
the archiv es screen and on the INFO bar . Once you exit the archiv es, the
USB icon will no longer sho w on the INFO bar e v en if the USB driv e is
still att ached. If you open the archiv es screen again, the USB icon will
come back aft er a short period of time.
IMPOR T ANT! Do not remo v e the USB driv e while in the archiv es
screen! Be sure t o exit the archiv es screen before you remo v e the
USB memory.
Sa ving t o Ext ernal USB Memory
Using the plus butt on (+), select the small bo x next t o the file or folder .
The bo x will turn or ange. When you press the OK butt on, a check mar k
will appear in the bo x and the line will appear blurred. Click the USB
icon next t o the bo x and press OK. The w arning message ''Are you sure
you w ant t o sa v e the select ed it ems t o an ext ernal memory de vice??''
will appear on screen. Press OK t o confirm.
NO TE : When you w ant t o sa v e multiple files, you can check the bo x es
next t o the files and use ''Sa v e Select ed'' function at the t op.
T o sa v e multiple files or folders in the archiv es, while the file or the
folder is select ed, go t o ''Select All'' using the up butt on (it will turn
or ange). Then press OK. All small bo x es will be check ed and all the
lines will appear blurred. Then select ''Copy Select ed'' at the t op and
press OK. The w arning message ''Are you sure you w ant t o sa v e the
select ed it ems t o an ext ernal memory de vice??'' will appear on screen.
Press OK t o confirm.
NO TE : If you w ant t o cancel any of the oper ations while the w arning
messages are displayed on screen, press the B A CK butt on.
NO TE : If there is no USB driv e insert ed during the sa v e process, the
message ''No ext ernal memory de vice is a v ailable!'' will appear .
NO TE : You can vie w the result screens and the screenshots sa v ed on
the USB driv e on a comput er in picture format.